Configure Instruments; Preselecting Quick Setting Keys With Savemode/With Dropmode Or Function Levels; Switching Afterblow On/Off - Sirona Sinius CS Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions SINIUS / SINIUS CS
63 22 726 D3561
D3561.201.01.03.02 05.2012
4.13.5

Configure instruments

➢ Touch the
Configure instruments
 The sub-screen opens.
4.13.5.1 Preselecting quick setting keys with SaveMode/with DropMode or
function levels

Preselecting quick setting keys with SaveMode/with DropMode or function levels

Settings can be made in the instrument programs using either the quick
setting keys (1...100) or two freely programmable function levels (E1, E2).
For more information, please refer to "Quick setting keys and function
levels" [ → 82].
When using the quick setting keys, you can choose one of two options for
saving the settings you made in the instrument program:
● SaveMode – The
programs:
The settings made in the instrument program will be saved after the
instrument is placed in its holder only if the Memory key was pressed
and held beforehand (> 2 s).
● DropMode –
When the instrument is deposited, the settings made in the
Instrument program will automatically be saved.
One of the following presettings can be selected:
● Field 1: Quick setting keys with SaveMode
● Field 2: Quick setting keys with DropMode
● Field 3: Function levels
➢ Touch the
 The selected field is highlighted orange.

Switching afterblow on/off

4.13.5.2
Switching afterblow on/off
After an instrument is deposited in its holder, the cooling spray remaining
in the instrument head or in the tip of the instrument is automatically blown
out by a brief activation of the chip blower (air puff).
➢ Touch the
 If the key is highlighted orange, the afterblow function is
activated.
4.13 Configuration of the treatment center (setup)
Instruments
key in the setup program.
Memory
key is displayed in the instrument
Memory
key hidden in Instrument programs:
Select memory type
key.
Afterblow
key.
4 Operation
165