Other Functions; Mob (Man Overboard) - Icom IC-M93D EURO Instruction Manual

9

OTHER FUNCTIONS

■ MOB (Man OverBoard)

You can enter a Man OverBoard (MOB) waypoint into the
transceiver with its GPS position data, as soon as a person
has fallen into the water and needs to be rescued. This
enables you to reach the MOB position even in the dark, or
when you have lost visual contact.
Entering an MOB waypoint
D
1.  P ush[◄]or[►]todisplay
2. Hold down the software key below
for 1 second to enter the
MOB waypoint.
• After entering, "Man Overboard!" is
displayed.
L You cannot enter the MOB waypoint
if no GPS data is received.
L You can only enter 1 MOB waypoint,
and the previously entered point is
overwritten when a new waypoint is
entered.
3.  P ush[ENT]tostartthenavigating
to the entered point.
L See page 48 for navigation details.
L P ushthesoftwarekeybelow[EXIT]
to stop the navigation and return to
the operating screen.
45
.
MOB screen
D
1.  P ush[◄]or[►]todisplay
2. Push the software key below
• The "MOB" screen is displayed.
L You can also display the "MOB"
screen by selecting the "MOB" item
on the Menu screen.
L "No Entry" is displayed if no MOB
waypoint is entered.
3. Push the software key below
[NAV]tostartthenavigation,
[DEL]todeletetheentry,and
[EXIT]toclosethe"MOB"screen.
Navigating to the MOB waypoint:
The transceiver can navigate you to
the MOB waypoint.
Pushthesoftwarekeybelow[NAV].
L See page 48 for navigation details.
Deleting the MOB waypoint:
1.  P ushthesoftwarekeybelow[DEL]todeletetheMOB
waypoint.
• "Are you sure?" is displayed.
2.  P ushthesoftwarekeybelow[OK]todelete.
L You can cancel the deletion by pushing the software key
below[CANCEL].
• "No Entry" is displayed.
.
.