Icom IC-M93D EURO Instruction Manual page 40

8
DSC OPERATION
D Sending a Position Reply call (Continued)
4. Select the reply "Able to Comply."
LSelect "Unable to Comply" if you cannot send a reply call.
5. Push the software key below [CALL] to send the reply.
• "Transmitting Position Reply" is displayed.
• After sending, the replied information is displayed.
6. Push the software key below [EXIT]
to return to the operating screen, or
below [RESEND] to resend.
• A confirmation screen is displayed.
7. Push the software key below [OK]
to return to the operating screen.
TIP: If no valid position is received while selecting [ACPT]
in step 2, and selecting "Able to Comply," the position and
time entry screen is displayed.
LSee "Entering the position and time" on page 22 for details.
33
Sending on the "Compose Other" screen
You can also send a Position Reply call by selecting
"Position Reply" on the "Compose Other" screen.
This enables you to reply even after ignoring the call when
you first received it.
1. Push the software key below
• The "Compose Other" screen is displayed.
2. Push [▲] or [▼] to select "Position Reply," and then
push [ENT].
• The caller's station or MMSI is displayed.
L "Position Reply" is not displayed if no Position Request call
has been received.
3. Select the station to send a Position Reply call to, and
the push [ENT].
4. Repeat steps 4 to 7 described in the left column.
.