Icom IC-M93D EURO Instruction Manual page 56

9
OTHER FUNCTIONS
■ Navigation (Continued)
Start navigating to a Waypoint:
L A Waypoint must be entered before navigating.
1.  P ush[◄]or[►]todisplay
2. Push the software key below
• The "Waypoint" screen is displayed.
3.  P ush[▲]or[▼]toselecta
Waypoint.
4. After selecting, push the
softwarekeybelow[NAV]tostart
navigating to the Waypoint.
49
.
.
D Navigation screen description
Range displays the radius of a
compass circle.
Push[▲]or[▼]tochangetherange
between 0.125, 0.25, 0.5, 0.75, 1.5,
3, 6, and 12 nm.
Displays the display's direction type.
Pushthesoftwarekeybelow[SEL]to
select "N-UP," "AC-UP," or "WP-UP."
LSee page 57 for details.
Thisflagiconindicatesthedirectiontoreachthe
target Waypoint or MOB waypoint.
Displays the bearing of the target Waypoint or
MOB waypoint from your vessel.
Displays the distance to the Waypoint or MOB
waypoint.
Displays the Course Over Ground.
Displays the Speed Over Ground.
TIP: Once the navigation starts, it continues even if you
close the Navigation screen by pushing the software key
below[EXIT].Toproperlyfinishthenavigation,pushthe
softwarekeybelow[FINISH].