Icom IC-M93D EURO Instruction Manual page 27

D Entering a Group ID
You can enter a total of 25 Group IDs, and assign names of
up to 10 characters.
1. Display the "Group ID" screen.
[MENU] ► "DSC Settings" ► "Group ID"
• "No ID" is displayed if no ID is entered.
2. Push the software key below [ADD].
• The Group ID's entry screen is displayed.
3. Enter the Group ID and its name in the same way as
described on the previous page.
NOTE: The first digit is fixed as
"0" for a Group ID.
The first two digits are fixed as
"0" for any Coast station ID.
4. After entering, push the software
key below [DONE] to save, and
return to the previous screen.
• The entered name is displayed.
D Deleting an Individual ID or Group ID
[Example: Deleting an Individual ID: ICOM #2]
1. Display the "Individual ID" screen.
[MENU] ► "DSC Settings" ► "Individual ID"
2. Push [▲] or [▼] to select "ICOM #2."
3. Push [►] to display [DEL].
4. Push the software key below [DEL].
• "Are you sure?" is displayed.
5. Push the software key below [OK] to delete.
L Push the software key below [CANCEL] to cancel the
deletion.
• The selected ID is deleted, and then returns to the previous
screen.
TIP: You can edit an ID and its name by pushing the
software key below [EDIT] in step 3.
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20