Icom IC-M94DE Instruction Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Transceiver
  5. IC-M94DE
  6. Instruction manual

Icom IC-M94DE Instruction Manual

Vhf marine transceivers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
VHF MARINE TRANSCEIVERS
|M94D
|M94DE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-M94DE and is the answer not in the manual?

Questions and answers

Related Manuals for Icom IC-M94DE

Summary of Contents for Icom IC-M94DE

  • Page 1 INSTRUCTION MANUAL VHF MARINE TRANSCEIVERS |M94D |M94DE This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

  • Page 2: Features

    Thank you for choosing this Icom product. This product was designed and built with Icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. ■ Important ■ Explicit definitions...

  • Page 3: In Case Of Emergency

    (fresh water) cloth, then dry it before operating. The transceiver may lose its waterproof protection if the case, jack cover, or battery cover is cracked or broken, or the transceiver has been dropped. Contact your Icom distributor or your dealer for advice.

  • Page 4: Precautions

    This could cause an explosion IC-M94D: –20°C (–4˚F) ~ +60°C (+140˚F) and death. IC-M94DE: –15°C (5˚F) ~ +55°C (131˚F) IC-M94DE (AUS): R WARNING! NEVER use or charge Icom –10°C (14˚F) ~ +55°C (131˚F) battery packs with non-Icom transceivers or non-Icom chargers.

  • Page 5: Précautions

    Icom avec des émetteurs-récepteurs MISE EN GARDE : NE PAS placer non-Icom ou des chargeurs non-Icom. l’émetteur-récepteur dans des Seuls les blocsbatteries Icom sont testés environnements excessivement et homologués pour être utilisés avec poussiéreux. Cela pourrait endommager des émetteurs-récepteurs Icom ou pour l’émetteur-récepteur.

  • Page 6: Safety Training Information

    The radio is RF exposure limits for “Occupational transmitting when “TX” is displayed on the Use Only.” In addition, your Icom radio function display. You can cause the radio to complies with the following Standards transmit by pushing the “PTT” switch.

  • Page 7: Infomation En Matiére De Sécurité

    établies par la FCC et d’IC. La d’IC, pour une «utilisation grand public». En radio est en train d’émettre lorsque le témoin outre, votre radio Icom satisfait les normes et du “TX” s’affiche sur l’écran ACL. La radio directives qui suivent en matière de niveaux émettra si vous appuyez sur le bouton du...

  • Page 8: Fcc Information

    CAUTION: Changes or modifications to this transceiver, not expressly approved by Icom Inc., could void your authority to operate this transceiver under FCC regulations. ■ Information FCC Cet équipement a été...

  • Page 9: Table Of Contents

    ■ Adjusting the volume level ... 15 14 VHF MARINE CHANNEL LIST �������� 72 ■ Adjusting the squelch level... 15 ■ For IC-M94D and IC-M94DE (AUS) ..72 ■ Setting the Call channel ....15 ■ For IC-M94DE (Except AUS) ..73 ■...

  • Page 10: Operating Rules

    NOTE: Even though the IC-M94D/IC-M94DE is capable of operation on VHF marine channels 1021, 1023, 1081, 1082, and 1083, according to FCC regulations these...

  • Page 11: Accessories

    ACCESSORIES ■ Supplied accessories Antenna Handstrap Belt clip Battery pack Power adapter Desktop charger Cigarette lighter cable (For Desktop charger) (With 2 screws) NOTE: Some accessories may not be supplied, or the shape may be different, depending on the transceiver version. ■...
  • Page 12 ACCESSORIES D Battery pack To insert: Push the sliding lock (1). Open the battery cover (1), and insert the battery pack into the transceiver so it fits flat (2). Securely attach the battery cover. To remove: Push the sliding lock, and then lift the battery cover to remove it. Then remove the battery pack.

  • Page 13: Panel Description

    PANEL DESCRIPTION ■ Front panel 4 CLEAR/LOCK KEY [CLR/ • Push to cancel the entered data, or to return to the previous screen. • Hold down for 1 second to turn the Key Lock function ON or OFF. (p. 17) 5 CHANNEL 16 KEY [16/C] •...

  • Page 14: Function Display

    PANEL DESCRIPTION ■ Function display 3 4 56 7 1 MMSI CODE (p. 11) 7 BATTERY INDICATOR Displays your MMSI code. Displays the battery’s remaining power. Full 2 POWER INDICATOR (p. 7) • “HI”: Displayed when high power is selected. Charging required •...

  • Page 15: Software Keys

    PANEL DESCRIPTION ■ Software Keys 14 POSITION/TIME DISPLAYS Displays the current position and time Various often-used functions are assigned when valid GPS data is received, or to the Software Keys for easy access. The when manually entered. functions’ icons are displayed above the Received GPS data: Software Keys, as shown below.
  • Page 16 PANEL DESCRIPTION D Software Key functions Function Reference Push to display the “Compose Distress” screen to select the nature of distress, then push the [DISTRESS] (red key) to make a call. NEVER MAKE A DISTRESS CALL IF YOUR SHIP p. 25 Compose Distress OR A PERSON IS NOT IN AN EMERGENCY.

  • Page 17: Battery Charging

    Even if the surface of IC-M94D: –20°C ~ +60°C (–4°F ~ +140°F) the battery does not show cracks or any IC-M94DE: –15°C ~ +55°C (5°F ~ 131°F) other damage, the cells inside the battery may rupture or catch fire.

  • Page 18: Charging Caution

    If any of these conditions occur, contact your transceiver during a lightning storm. It may Icom dealer or distributor. result in an electric shock, cause a fire or damage the transceiver. Always disconnect BE SURE to replace the battery pack the power adapter before a storm.

  • Page 19: Battery Charger

    BATTERY CHARGING ■ Battery charger NOTE: The transceiver MUST be turned OFF while charging. Otherwise: - The battery will not be charged correctly. - The battery life may be shortened. D Mounting the Battery charger NOTE: Be sure the tabs on the transceiver are correctly aligned with the Supplied screws guide rails inside the battery charger.

  • Page 20: Preparations

    PREPARATIONS ■ Entering the MMSI code The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits. You can only enter the code when turning ON the transceiver for the first time. This initial code entry can be done only once. After entering, it can be changed only by your dealer or distributor.

  • Page 21: Entering The Atis Id (For The Hol And Frg Versions)

    PREPARATIONS ■ Entering the ATIS ID (For the HOL and FRG versions) The Automatic Transmitter Identification System (ATIS) ID consists of 10 digits. You can enter the ID in the “ATIS ID Input” item on the Menu screen. This ID entering can be done only once. After entering, it can be changed only by your dealer or distributor.

  • Page 22: Basic Operations

    BASIC OPERATIONS ■ Selecting a channel NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. To avoid damage to the transceiver, turn OFF the transceiver before charging. D Regular Channel You can select a channel by pushing [▲] or [▼].

  • Page 23: Weather Channels And Weather Alert (For The Usa, Aus, And Exp Versions)

    BASIC OPERATIONS D Selecting a Channel Group Preset Channel Group Version ATIS              EXP (Other)    ■ Weather channels and Weather Alert (For the USA, AUS, and EXP versions) The USA, AUS, and EXP version transceivers have 10 preset Weather channels.

  • Page 24: Adjusting The Volume Level

    BASIC OPERATIONS ■ Adjusting the volume level Push [VOL/SQL]. • The volume level adjustment screen is displayed. Push [▲], [▼], [◄], or [►] to adjust the audio volume level. L You can also push to select OFF, or to set the maximum volume level.

  • Page 25: Receiving And Transmitting

    BASIC OPERATIONS ■ Receiving and transmitting CAUTION: DO NOT transmit without an antenna. Push [▲] or [▼] to select the channel to call on. is displayed while receiving a signal. Hold down [PTT] and speak into the microphone at your normal voice level. •...

  • Page 26: Lock Function

    BASIC OPERATIONS ■ Lock function The Lock function electronically locks all keys except for [ ], [PTT], and [DISTRESS]. This function enables you to prevent accidentally changing the channel, or accessing the functions. z Hold down [CLR ] for 1 second to turn the Lock function ON or OFF. é...

  • Page 27: Aquaquake Water Draining Function

    BASIC OPERATIONS ■ AquaQuake Water Draining function Water in the speaker grill may muffle the sound coming from the speaker. The AquaQuake Water Draining function removes water from the speaker grill by vibrating the speaker. CAUTION: DO NOT use the AquaQuake Water Draining function when an external speaker microphone is connected.

  • Page 28: Scan Operation

    SCAN OPERATION ■ Scan types You can find ongoing communication by scanning the Favorite channels. Scan is for the all transceiver versions except the HOL version. Before starting a scan: • Set the channels that you want to scan as Favorite channels. (p. 20) L Only the Favorite channels are scanned.

  • Page 29: Setting Favorite Channels

    SCAN OPERATION ■ Setting Favorite channels You can quickly recall often-used channels by setting them as Favorite channels. You can set Favorite channels in each Channel Group. Select a Channel Group on the Menu screen. (p. 66) [MENU] > Settings > Radio > Channel Group Push [▲] or [▼] to select the channel.

  • Page 30: Dualwatch/Tri-Watch

    DUALWATCH/TRI-WATCH (Except the HOL version) ■ Description Dualwatch and Tri-watch are convenient to periodically check Channel 16 while you are operating on another channel. Dualwatch Tri-watch Call channel CH 16 Operating Operating channel channel CH 16 Periodically checks Channel Periodically checks Channel 16 and 16 while operating on another the Call channel while operating on channel.

  • Page 31: Dsc Operation

    DSC OPERATION ■ DSC address ID D Entering an Individual or Group ID You can enter a total of 75 Individual IDs and 25 Group IDs, and assign names to them of up to 10 characters. Open the “Individual ID” or “Group ID” screen. [MENU] >...

  • Page 32: Entering The Position And Time

    DSC OPERATION D Deleting an entered ID (Example: Deleting an Individual ID: STATION 2) Open the “Individual ID” screen. [MENU] > Settings > DSC > Individual ID Select “STATION 2.” Push • “Delete the ID. Are you sure?” is displayed. Push to delete.

  • Page 33: Sending Dsc Calls (Distress)

    DSC OPERATION ■ Sending DSC calls (Distress) A Distress call should be sent if, in the opinion of the captain, the ship or a person is in distress and requires immediate assistance. NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A PERSON IS NOT IN AN EMERGENCY.
  • Page 34 DSC OPERATION D Regular call Select the nature of the Distress call to include in the Regular Distress call. Push • The “Compose Distress” screen is displayed. Push [ENT] to enter the Nature Selection mode. Select the nature of the Distress, and then push [ENT]. (Example: Flooding) •...
  • Page 35 DSC OPERATION D Distress Cancel call If you have accidentally made a Distress call, or made an incorrect Distress call, send a Distress Cancel call to cancel the call as soon as possible while waiting for an Acknowledgement. Be sure to report the purpose of the cancellation. While waiting for an Acknowledgement, push •...
  • Page 36 DSC OPERATION D Distress call Software Key description While waiting for an Acknowledgement: After receiving an Acknowledgement: : Cancels the Distress call and : Closes the Distress operation, and enables you to send a Cancel call. returns to the operating screen. : Enables you to resend the : Displays the information Distress call by holding down...

  • Page 37: Sending Dsc Calls (Other)

    DSC OPERATION ■ Sending DSC calls (other) NOTE: To ensure proper DSC operation, be sure to correctly adjust the “CH 70 SQL Level” item on the Menu screen. (p. 43) D Sending an Individual call An Individual call enables you to send a DSC signal to only a specific station. You can communicate after receiving the Acknowledgement “Able to comply.”...
  • Page 38 DSC OPERATION D Sending an Individual Acknowledgement When you have received an Individual call (p. 36), send an Acknowledgement to the calling station. When the Auto Ack is set to “Manual,” you can select an appropriate acknowledgement type. (p. 42) While an Individual call is being received, push to turn OFF the alarm.
  • Page 39 DSC OPERATION D Sending a Group call A Group call enables you to send a DSC call to only a specific group. L You can send a Group call to a pre-entered group address, or manually enter the address before sending. (p. 22) Push •...
  • Page 40 DSC OPERATION D Sending a Test call You should avoid sending test calls on the exclusive DSC Distress channels and safety calling channels. When you cannot avoid testing on a Distress or safety channel, you should indicate that these are test calls. Normally the Test call would require no further communications between the two stations involved.
  • Page 41 DSC OPERATION D Sending a Test Acknowledgement By default, when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). If the function is set to “Manual,” do the following steps to send an Acknowledgement. After a Test call is being received, push to turn OFF the alarm.
  • Page 42 DSC OPERATION D Sending a Position Request call (For only the USA and EXP versions) You can send a Position Request call to a station, depending on the presetting. Send a Position Request call when you want to know a specific ship’s current position. Push •...
  • Page 43 DSC OPERATION D Sending a Position Reply call Send a Position Reply call when a Position Request call is received. If the Auto ACK function is set to “Auto,” the Acknowledgement is automatically sent to the calling station. (p. 42) While a Position Request call is being received, push to turn OFF the alarm.

  • Page 44: Receiving Dsc Calls (Distress)

    DSC OPERATION ■ Receiving DSC calls (Distress) The transceiver receives Distress calls, Distress Acknowledgements, and Distress Cancel calls. When you receive a call, an emergency alarm sounds. NOTE: The screens that are displayed when a Distress call or an Acknowledgement is received slightly differ from one another.

  • Page 45: Receiving Dsc Calls (Other)

    DSC OPERATION ■ Receiving DSC calls (other) The transceiver receives the following types of DSC calls. • Individual calls • Individual Acknowledgements (p. 29) • Group calls (p. 37) • All Ships calls (p. 37) • Position Request calls (p. 38) •...
  • Page 46 DSC OPERATION D Receiving a Group call or All Ships call When a Group call is received: • An alarm sounds. • “RCVD Group Call” is displayed. When an All Ships call is received: • An alarm sounds. ( Example: when a •...
  • Page 47 DSC OPERATION D Receiving a Position Request call NOTE: If the Auto ACK function is set to “Auto,” the Position Reply is automatically sent to the calling station. (p. 42) However, even if the Auto ACK function is set to “Manual,” after receiving a Distress Acknowledgement, or while in the Distress Cancel call procedure, the Position Reply is automatically sent to the calling station.
  • Page 48 DSC OPERATION D Receiving a Test call NOTE: If the Auto ACK function is set to “Auto,” the Test Acknowledgement call is automatically sent to the calling station when the call is received. (p. 42) If the function is set to “Manual,” the following screens are displayed. When a Test call is received: •...

  • Page 49: Dsc Log

    DSC OPERATION ■ DSC Log D Received DSC Log The transceiver saves up to 50 received Distress call messages and 50 received “Others” call messages in your DSC Log. On the operating screen, “ ” is displayed when there is an unread call message. The icon blinks when there is a new received call message.

  • Page 50: Unread List

    DSC OPERATION ■ Unread List If the transceiver has unread DSC calls, you can check them in the “Unread List” screen. Push • The “Unread List” screen is displayed. Select a DSC call. Push the Software Key below for your next operation. Deletes the selected DSC call.

  • Page 51: Dsc Settings

    DSC OPERATION ■ DSC settings On the “DSC” screen, you can make settings of the DSC call related items. [MENU] > Settings > DSC Position Input CH Auto Switch See “Entering the position and time” on Select whether or not to automatically page 23 for details.
  • Page 52 DSC OPERATION ■ DSC settings MOB Auto Set CH 70 SQL Level z MOB Key Sets the Squelch level for Channel 70 to For 30 seconds after entering the MOB 1 ~ 10 or Open. waypoint, this function automatically DST at PW OFF sets the Nature of Distress as “Man Overboard.”...

  • Page 53: Ais Receiver

    AIS RECEIVER ■ About AIS The Automatic Identification System (AIS) is primarily used for collision-risk management and navigation safety. It may automatically transmit and receive vessel information, such as the vessel name, MMSI code, vessel type, position data, speed, course, destination, and more, depending on the class.

  • Page 54: Using The Plotter Screen

    AIS RECEIVER NOTE: For the AIS receiver operation, the transceiver must be receiving valid GPS signals, or your position must be entered. (p. 23) ■ Using the plotter screen In the plotter screen, the display range and the icons of the AIS target, waypoint for navigation and MOB are displayed.
  • Page 55 AIS RECEIVER D Plotter screen 6 DISPLAY RANGE • Displays the selected display range. • Push to select a display range (0.125, 0.25, 0.5, 0.75, 1.5, 3, 6, 12 NM (nautical miles)). 7 TARGET ICON Targets whose AIS signal are received are displayed with icons.

  • Page 56: Using The Ais List Screen

    AIS RECEIVER ■ Using the AIS list screen There are 3 types of AIS lists, Target, Danger, and Friends. Push [MENU]. • The Menu screen is displayed. Push [▲] or [▼] to select “AIS,” and then push [ENT]. • The “AIS” screen is displayed. Push [▲] or [▼] to select a list, and then push [ENT].
  • Page 57 AIS RECEIVER D Target/Friends List screen D Danger List screen The Target List screen displays the AIS The Danger List screen displays any targets of up to 200 targets that the Danger target whose CPA (Closest Point transceiver detects. of Approach) distance and TCPA (Time to CPA) time are less than the set values.

  • Page 58: Setting A Friend

    AIS RECEIVER ■ Setting a Friend You can set up to 100 AIS targets as a Friend in the Friends List. An alarm sounds when a Friend is detected, depending on the setting. (p. 54) D Entering an ID There are 3 ways of setting a Friend, using Selecting on the plotter screen: the Friends List, selecting in the AIS list, or Push...

  • Page 59: About The Details Screen

    AIS RECEIVER ■ About the details screen The details screen displays the information about the selected AIS target. The contents may differ, depending on the selected target. L When a Danger target is selected, is displayed. (p. 48) L When a Friend target is selected, is displayed.
  • Page 60 AIS RECEIVER D Contents list Class B SAR aircraft COG (Course Over Ground) AIS class HDG (Heading) MMSI code PA (Position Accuracy (H: High, L: Low)) Name Range Country name Bearing Call Sign Bow to antenna length Vendor ID Stern to antenna length LAT (Latitude) Port side to antenna length LON (Longitude)

  • Page 61: Ais Settings

    AIS RECEIVER ■ AIS settings AIS settings can be customized in “AIS” on the Menu screen. [MENU] > Settings > AIS North/Course up CPA/TCPA You can select the display type for the AIS z Indicator plotter screen. You can select whether or not to display North Up: The top of the plotter screen the CPA/TCPA icon on the operating...
  • Page 62 AIS RECEIVER ■ AIS settings CPA/TCPA z ID Blocking The transceiver blocks AIS z CPA transponders that are entered into the Set a CPA (Closest Point of Approach) ID Blocking list. Enter your vessel’s value to between 0.1 and 6.0 NM (in 0.1 transponder ID or other vessel’s NM steps) for the alarm function.
  • Page 63 AIS RECEIVER Friends MOB Support z Friends List z Function Displays all Friend targets that you have You can select whether or not to turn entered. the MOB Support function ON or OFF. L “No ID” is displayed when there is no L This function is activated only when: Friend target.

  • Page 64: Other Functions

    OTHER FUNCTIONS NOTE: For the other functions operation, the transceiver must be receiving valid GPS signals, or your position must be entered. (p. 23) ■ Waypoint Waypoints are GPS position data points of places you want to go to, the position of your own vessel, or of a vessel you received a DSC call from.
  • Page 65 OTHER FUNCTIONS D Entering a waypoint Position information that you want to memorize can be added as a waypoint. TIP: You can also add your current position as a waypoint by pushing Open the “Waypoint” screen. [MENU] > Navigation > Waypoint Push to add a waypoint.
  • Page 66 OTHER FUNCTIONS D Editing a waypoint A waypoint’s name, latitude, longitude data can be edited. L You cannot edit the waypoint that is being used for navigation. Open the “Waypoint” screen. [MENU] > Navigation > Waypoint Push [▲] or [▼] to select a waypoint. L Push to sort the waypoints by Name or Range.

  • Page 67: Mob (Man Overboard)

    OTHER FUNCTIONS ■ MOB (Man Overboard) You can enter a Man OverBoard (MOB) waypoint into the transceiver with its GPS position data, as soon as a person has fallen into the water and needs to be rescued. This enables you to reach the MOB position even in the dark, or when you have lost visual contact. You can select a AIS target during the MOB mode.

  • Page 68: Navigation

    You can select a AIS target during navigation. L The function cannot work while in the MOB mode. NOTE: IC-M94D/IC-M94DE’s Navigation function is a supplemental aid to navigation only, and is not intended to be a substitute for primary Navigation equipment.
  • Page 69 OTHER FUNCTIONS Selecting on the AIS screen: Open the following screen. (pp. 45, 47) [MENU] > AIS > Plotter or Target/Danger/Friend list L You can also open the plotter screen by pushing Push [▲] or [▼] to select an AIS target or waypoint. Push •...

  • Page 70: Lost Target

    OTHER FUNCTIONS ■ Lost target A vessel is regarded as a “Lost target” after a specified period of time has passed since the vessel last transmitted data, as described below. The “Lost target” icon disappears from the plotter screen when the preset period of time has passed after the vessel was regarded as a “Lost target.”...

  • Page 71: Gps

    OTHER FUNCTIONS ■ GPS TIP: Use the transceiver outdoors so the receiver has a clear view to receive GPS signals from the satellites. D Status screen The GPS “Status” screen displays the quantity, signal power, and position of the GPS satellites in the sky view.

  • Page 72: Menu Screen

    MENU SCREEN ■ Using the Menu screen The Menu screen is used to set items, select options, and so on for the transceiver’s functions. D Menu screen operation Example: Setting the channel group to “INT.” Push [MENU]. • The Menu screen is displayed. Push [▲] or [▼] to select “Settings,”...

  • Page 73: Menu Screen Items

    MENU SCREEN ■ Menu screen items The Menu screen is constructed in a tree structure. See the referred pages for each item. The displayed menu items may differ, depending on the presetting. Menu Item Reference Compose Distress Nature p. 24 Latitude Longitude p.

  • Page 74: Menu Items Description

    MENU SCREEN ■ Menu items description D Configuration UTC Offset Set the offset time between Universal Time [MENU] > Settings > Configuration Coordinated (UTC) and your local time to between –14:00 and +14:00 (in 1 minute Backlight steps). Customize the display backlight settings. z Level Inactivity Timer Set the backlight brightness level to...
  • Page 75 MENU SCREEN D Radio Float’n Flash The Float’n Flash function detects that [MENU] > Settings > Radio the transceiver has come in contact with water. When the function turns ON, the Scan Type backlight starts to blink to make it easy to Selects the scan type.
  • Page 76 MENU SCREEN D Radio Call Channel RT Indicator You can change your Call channel. The Select whether or not to display the default setting may differ, depending on Radio Telephone indicator (RT) while in the transceiver version. the RT mode. This indicates that while L See page 15 for details.

  • Page 77: Specifications And Options

    ■ Specifications L All stated specifications are subject to change without notice or obligation. L Measurements made without an antenna. General IC-M94D IC-M94DE IC-M94DE (AUS) 156.025 MHz ~ 156.000 MHz ~ 156.025 MHz ~ 157.425 MHz 161.450 MHz 157.425 MHz 156.050 MHz ~...
  • Page 78 SPECIFICATIONS AND OPTIONS ■ Specifications Receiver IC-M94D IC-M94DE IC-M94DE (AUS) 0.25 μV (12 dB –6 dBμ Sensitivity (typical) SINAD) at 20 dB SINAD Squelch sensitivity 0.25 μV –6 dBμ (threshold, typical) External 0.2 W (into 8 Ω) Audio output power External 0.35 W (typical)

  • Page 79: Options

    SPECIFICATIONS AND OPTIONS ■ Options Some options may not be available in some countries. Please ask your dealer for details. D Battery pack D Others • BP-306 li-ion battery pack • FA-SC59V antenna Voltage: 7.2 V • MB-133 belt clip •...

  • Page 80: Using The Hm-165

    SPECIFICATIONS AND OPTIONS ■ Using the HM-165 Alligator type clip To attach the speaker microphone to your shirt or collar. PTT switch Push to transmit. Release to receive. Microphone Speaker Turn OFF the transceiver when connecting the HM-165. NOTE: • NEVER immerse the connector in water. If the connector becomes wet, BE SURE to dry it before attaching to the transceiver.

  • Page 81: Vhf Marine Channel List

    VHF MARINE CHANNEL LIST ■ For IC-M94D and IC-M94DE (AUS) NOTE: When the “Channel Display” is set to “3 digits” in the Radio setting, the channel number is displayed in 3 digits. See page 67 for details. (For example: “1001 is displayed as “01A.”)

  • Page 82: For Ic-M94De (Except Aus)

    VHF MARINE CHANNEL LIST ■ For IC-M94DE (Except AUS) NOTE: When the “Channel Display” is set to “3 digits” in the Radio setting, the channel number is displayed in 3 digits. See page 67 for details. (For example: “1001” is displayed as “01A.”)

  • Page 83: Troubleshooting

    TROUBLESHOOTING The transceiver does not turn ON. z The battery is exhausted or over discharged. → Recharge the battery pack. (p. 10) z The battery pack is not correctly attached. → Correctly reattach the battery pack. (p. 3) Little or no sound comes from the speaker. z Squelch level is set too high.

  • Page 84: Index

    INDEX Details screen ....50 GPS ......62 Accessories ....2 Display Contrast Group......13 AIS list Danger List ....48 Configuration ... 65 Group call Friends List ..... 48 Distress call Receiving ....37 Target List ....48 Cancel call ....26 Sending ....
  • Page 85 INDEX Waypoint Man Overboard (MOB) Radio Info ....67 Receiving ..... 16 Deleting ....57 Starting ....58 Stopping ....58 RT Indicator Editing ..... 57 Menu screen Radio settings ..67 Entering ....56 Description ....65 List ......55 Items .......
  • Page 86 MEMO...
  • Page 87 MEMO...
  • Page 88 How the World Communicates A7615H-1EX-4 1-1-32 Kamiminami, Hirano-ku, Printed in Japan Osaka 547-0003, Japan © 2020–2022 Icom Inc. Feb. 2022...

This manual is also suitable for:

Ic-m94d

Table of Contents