Specifications And Options; Specifications - Icom IC-M93D EURO Instruction Manual

14

SPECIFICATIONS AND OPTIONS

■ Specifications

IC-M93D
D General
• Frequency coverage:
• Mode:
• Operating temperature range:
• Current drain (approximately): Tx (5 W) 1.5 A
• Power supply requirement:
• Frequency stability:
• Antenna impedance:
• Dimensions (approximately):
(Projections not included)
• Weight (approximately):
D Transmitter
• Output power:
• Modulation system:
• Maximum frequency deviation: ±5.0 kHz
• Adjacent channel power:
• Spurious emissions (typical):
D Receiver
• Sensitivity (typical):
• Squelch sensitivity (threshold, typical):
65
TX 156.025 ~ 157.425 MHz
RX 156.050 ~ 163.275 MHz
FM (16K0G3E), DSC (16K0G2B)
–20°C ~ +60°C (–4°F ~ +140°F)
Tx (1 W) 0.7 A
RX maximum audio 0.25 A (External)
0.45 A (Internal)
7.2 V DC nominal (negative ground)
±10 ppm
50 ˘ nominal
57 (W) × 144.6 (H) × 38.5 (D) mm
2.2 (W) × 5.7 (H) × 1.5 (D) inches
265 g/9.3 oz with BP-285
5 W/1 W
Variable reactance frequency
modulation
70 dB
–68 dBc
0.25 µV (12 dB SINAD)
0.25 µV
• Intermodulation rejection ratio:
• Spurious response rejection ratio: 70 dB (typical)
• Adjacent channel selectivity:
• Audio output power (at 10% distortion):
IC-M93D EURO
D General
• Frequency coverage:
• Mode:
• Operating temperature range: –15°C ~ +55°C
• Current drain (approximately): TX (5 W) 1.5 A
• Power supply requirement:
• Frequency stability:
• Antenna impedance:
• Dimensions (approximately):
(Projections not included)
• Weight (approximately):
70 dB (typical)
70 dB (typical)
0.35 W typical (External)
with an 8 ˘ load
0.9 W typical (Internal) with a
12 ˘ load at 1 kHz
TX 156.000 ~ 161.450 MHz
(156.000 ~ 161.600 MHz for Dutch version)
Rx 156.000 ~ 163.425 MHz
FM (16K0G3E), DSC (16K0G2B)
TX (1 W) 0.7 A
RX maximum audio 0.25 A (External)
0.45 A (Internal)
7.2 V DC nominal (negative ground)
±1.5 kHz
50 ˘ nominal
57 (W) × 144.6 (H) × 38.5 (D) mm
265 g with BP-285