Icom IC-M93D EURO Instruction Manual page 31

NOTE (For USA and Export versions):
After sending a Distress call without position data
• While waiting for an Acknowledgement, if valid position data is
received, the transceiver will automatically send a Distress call
again.
• Even after exiting the DSC mode, if valid position data
is received within 20 minutes after receiving a Distress
Acknowledgement, the transceiver will automatically send a
Distress call again.
D Distress call software key description
While waiting for an Acknowledgement:
[CANCEL]: Cancels the Distress call and enables you to
send a Cancel call. (See the right column)
[RESEND]: Enables you to resend the Distress call by
holding down [DISTRESS] again.
[PAUSE]:
Pauses the countdown to resend the next
Distress call.
[INFO]:
Displays the information of the Distress call
that you have sent.
After receiving an Acknowledgement:
[EXIT]:
Closes the Distress operation, and returns to
the operating screen.
[HIST]:
Displays the "Distress History."
[INFO]:
Displays the information of the received
Distress Acknowledgement.
D Distress Cancel call
If you have accidently made a Distress call, or made an
incorrect Distress call, send a Distress Cancel call to
cancel the call as soon as possible while waiting for an
Acknowledgement call, and report the purpose of the
cancellation.
1. While waiting for an Acknowledgement call, push the
software key below [CANCEL].
• The screen below is displayed.
2. Push the software key below [CONT].
• The Distress Cancel call is sent.
• Channel 16 is automatically selected.
3. Hold down [PTT] to report the purpose of the
cancellation.
LYou can display the wording of the cancellation by pushing [▼].
4. After communicating, push the software key below
[FINISH].
• The screen to the right is displayed.
5. Push the software key below [OK] to finish the Distress
Cancel call.
• Returns to the operating screen.
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24