Icom IC-M93D EURO Instruction Manual page 39

Sending on the "Compose Other" screen
You can also send a Test Acknowledgement by selecting
"Test ACK" on the "Compose Other" screen.
This enables you to resend an Acknowledgement, or send
even after ignoring the call when you first received it.
1. Push the software key below
• The "Compose Other" screen is displayed.
2. Push [▲] or [▼] to select "Test ACK," and then push
[ENT].
• The Test caller's station or MMSI is displayed.
L "Test ACK" is not displayed if no Test call has been received.
.
D Sending a Position Reply call
Send a Position Reply call when a Position Request call
is received. If the Auto ACK function is set to "Auto," the
Acknowledgement is automatically sent to the calling
station. (p. 42)
1. While a Position Request call is being received, push
any software key to turn OFF the alarm.
2. Push the software key below [ACPT].
• The received call's information is displayed.
L If you want to send an "Able to Comply" Acknowledgement
right away, push the software key below [ABLE].
L If you cannot send a reply call, push the software key below
[UNABL].
3. Push the software key below [ACK].
8
DSC OPERATION
Continued on the next page.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32