Icom IC-M93D EURO Instruction Manual page 63

Noise Cancel
TheNoiseCancelfunctionreducesrandomnoise
components in the received or transmitted signal. Set the
functionforbothreceivingandtransmitting.
RX
• Off: TheNoiseCancelfunctionisOFF.
• 1:  R educesrandomnoisecomponentsinthereceived
signal to approximately one half.
• 2:  R educesrandomnoisecomponentsinthereceived
signal to approximately one third.
• 3:  R educesrandomnoisecomponentsinthereceived
signal to approximately one tenth.
TX
• On:  R educesrandomnoisecomponentsinthetransmitted
signal to approximately one third.
• Off: TheNoiseCancelfunctionisOFF.
Call Chancel
YoucanchangeyourCallchannel.Thedefaultsetting
differs, depending on the transceiver version.
LSee page 13 for details.
FAV Settings
(Default: Off)
You can set all channels as Favorite channels, clear all
settings, or reset to default. By default, some channels
are preset. The Favorite channels differ, depending on the
transceiver version.
• Set All Channels:
• Clear All Channels:ClearsallFavoritechannels.
• Set default:
LSeepage17fordetails.
RT Indicator
SelectwhetherornottodisplaytheRadioTelephone
indicator(RT)whileintheRTmode.Thisindicatesthatwhile
RTisdisplayed,youcanmakeavoicecommunication,
exceptforaDSCcall.
• On:
(Default: —) • Off:
L W hen"On"isselected,"STBY"isdisplayedwhileinthestandby
mode,and"DSC"isdisplayedwhileintheDSCmode.
MENUSCREEN
Sets all channels as Favorite channels.
 R esetsFavoritechannelstothe
default.
 T heRTindicatorisdisplayed.
TheRTindicatorisnotdisplayed.
10
1
2
3
4
5
6
7
8
9
(Default: On)
10
11
12
13
14
15
16
56