Icom IC-M93D EURO Instruction Manual page 50

8
DSC OPERATION
■ DSC Settings (Continued)
Unread Return
This function puts the received DSC call on hold while
receiving another call.
On: While receiving another call, the received DSC call is
put on hold until the currently receiving call is hung up.
Off: While receiving another call, the received DSC call is
saved in the DSC Log.
MOB Auto Set
• MOB Key (Default: On (30 sec))
For 30 seconds after entering the MOB waypoint, this function
automatically sets the Nature of Distress as "Man Overboard."
On (30 sec): The Nature of Distress is automatically set
to "Man Overboard" for 30 seconds after
entering the MOB waypoint.
Off: The function is OFF.
• Water Detection (Default: On (30 sec))
For 30 seconds after the transceiver has detected water,
this function automatically sets the Nature of Distress as
"Man Overboard."
On (30 sec): The Nature of Distress is automatically set
to "Man Overboard" for 30 seconds after the
transceiver has detected water.
Off: The function is OFF.
43
Alarm Status
(Default: On)
Set the alarm ON or OFF for each DSC related item.
• Safety (Default: On)
An alarm sounds when a Safety DSC call is received.
• Routine (Default: On)
An alarm sounds when a Routine DSC call is received.
• Warning (Default: On)
An alarm sounds when:
- no MMSI code is entered.
- the position data has not been received for 2 minutes
after turning ON the transceiver.
- the received position data has not been updated for 10
minutes.
- the received position data or manually entered position
data has not been updated for 4 hours.
• Self-Terminate (Default: On)
An alarm sounds when duplicate Distress calls are
received.
• Discrete (Default: On)
An alarm sounds when a lower priority call is received
while receiving a high priority call.