Icom IC-M93D EURO Instruction Manual page 15

High/Low
Push to set the power to high or low.
LSome channels are set to only low power.
Channel/Weather channel
Push to select regular channels or Weather* channels.
is displayed except for the USA, Australian, and
L
Export versions.
L While the Call channel or Channel 16 is displayed, push
this key to return to the regular channel mode.
* The Weather channels are for only the USA, Australian,
and Export versions.
AquaQuake
Hold down to turn ON the AquaQuake function to
clear water from the speaker grill.
Favorite channel
z Push to select a Favorite channel.
z Hold down for 1 second to set the displayed
channel as a Favorite channel.
z While a Favorite channel is displayed, hold down
for 1 second to clear the Favorite channel setting.
Channel Name
Push to edit the name of the displayed channel.
Backlight
(p. 5)
Push to display the backlight brightness adjustment
screen.
L W hileintheadjustmentmode,push[▲]/[▼][◄]/[►]to
(p. 11~12)
adjust the brightness to between 1 and 7, or OFF.
MOB
z Push to display the "MOB" screen.
z Hold down for 1 second to memorize the current
position as the Man OverBoard (MOB) waypoint.
Waypoint
z Push to display the "Waypoint" screen.
(p. 15)
z Hold down for 1 second to memorize the current
position as a Waypoint.
Navigation
(p. 17)
While displaying the "MOB" or "Waypoint" screen,
push this key to start navigating to the selected
position.
Compass
Push to display the "Compass" screen to check the
vessel's course heading, Speed Over Ground (SOG)
(p. 15)
and Course Over Ground (COG).
PANEL DESCRIPTION
(p. 57)
(p. 45)
(p. 46)
(p. 48)
(p. 50)
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8