Waypoint - Icom IC-M93D EURO Instruction Manual

■ Waypoint

Waypoints are GPS position data points of places you want
to go to, the position of your own vessel, or of a vessel you
received a DSC call from. You can enter up to 50 Waypoints
with names of up to 10 characters. You can enter your
current position information, or add one as a destination or
landmarks you often go to, as information for easy access.
D Entering a Waypoint
Entering your current position as a Waypoint:
1.  P ush[◄]or[►]todisplay
2. Hold down the software key
below for 1 second.
• "Waypoint was stored" is displayed.
• The current position is entered as a
Waypoint.
L You cannot register a Waypoint if
no GPS data is received.
3. Push [CLR ]toreturntothe
é
operating screen.
Manually entering a Waypoint:
1.  P ush[◄]or[►]todisplay
2. Push the software key below
• The "Waypoint" screen is displayed.
3. Push[◄]or[►]todisplay[ADD].
4. Pushthesoftwarekeybelow[ADD].
• Enters the Waypoint entry mode.
• The current position is displayed in the entry boxes.
.
.
.
5. Edit the latitude and longitude.
TIP:
• Select a number or the compass
directionusing[▲]/[▼]/[◄]/[►].
•  P ush[ENT]toentertheselected
number.
•  S elect"←"or"→,"tomovethe
cursor.
• Push the software key below
select latitude, longitude, and name.
Entering a Waypoint name:
1. After editing the latitude and longitude, push the
softwarekeybelow[NEXT]toselect"Name."
TIP:
•  S elect[!$?]tousecharacters,andselect[ABC]touse
numbers and letters.
• Selectcharactersorspaceusing[▲]/[▼]/[◄]/[►].
•  P ush[ENT]toentertheselectedcharacter.
•  S elect"←"or"→,"tomovethecursor.
2. Push the
software key
below to
save the edited
name.
OTHER FUNCTIONS
to
Waypoint entry mode
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
46