Dsc Log - Icom IC-M93D EURO Instruction Manual

D Receiving a Test Acknowledgement call
After sending a Test call, the called station will send you a
Test Acknowledgement call.
When a Test Acknowledgement call is received:
• The alarm sounds for 2 minutes.
• "Received ACK" is displayed.
Push any software key to turn OFF the alarm.
• The received call's information is displayed.
• The call is saved in the DSC Log.
L Push the software key below [EXIT] to return to the operating
screen.

■ DSC Log

D Received DSC Log
The transceiver saves up to 50 received Distress call
messages and 50 received "Others" call messages in your
DSC Log.
On the operating screen, "
unread call message.
1. Display the "DSC Log" screen.
[MENU] ► "DSC Log"
2. Push [▲] or [▼] to select "Received," and then push
[ENT].
• The "Received" screen is displayed.
3. Push [▲] or [▼] to select
"Distress" or "Others," and then
push [ENT].
L "Distress" displays the received
Distress call log, and "Others"
displays the received DSC call log.
TIP: You can also display the "Received" screen by
pushing the software key below
screen.
DSC OPERATION
" is displayed when there is an
on the operating
Continued on the next page.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
40