Icom IC-M93D EURO Instruction Manual page 13

r STATUS ICON
• "STBY" is displayed while not receiving nor transmitting.
• "RT" (Radio Telephone mode) is displayed while
receiving or transmitting a signal or when the squelch
opens. (p. 13, 56)
• "DSC" is displayed while in the DSC mode.
t CHANNEL NAME
• The channel name is displayed, if entered. (p. 15)
• "SCAN" or "SCAN 16" is displayed while scanning. (p. 16)
• "DUAL 16" or "TRI 16" is displayed while using the
Dualwatch or Tri-watch function. (p. 18)
y POSITION/TIME INDICATOR
Displays the current position and time when valid GPS
data is received, or when manually entered.
Received GPS data:
• "??" blinks if no GPS data is received for 30 seconds after
receiving valid GPS data, and then "??" and a warning message
are displayed alternately after 10 minutes.
• A warning message is displayed if no GPS data is received for 4
hours after receiving valid GPS data.
• "No Position No Time" is displayed if no GPS data is received
for 2 minutes after turning ON the transceiver, and then a
warning message is displayed.
L "Local" is displayed when the UTC Offset time is set. (p. 21)
Manually entered GPS data:
• A manually entered GPS data is valid for 4 hours, and then a
warning message is displayed after 4 hours.
L "Manual" is displayed.
u SOFTWARE KEY FUNCTION DISPLAY (p. 7, p. 14)
• The software key functions are displayed.
• "Key Locked" is displayed while the Lock function is ON.
PANEL DESCRIPTION
i CHANNEL NUMBER READOUT
Displays the selected operating channel number.
L"A" is displayed when a simplex channel is selected.
o CALL CHANNEL ICON (p. 11)
Displayed when a Call channel is selected.
!0 FAVORITE CHANNEL ICON (p. 17)
Displayed when a Favorite channel is selected.
!1 MAIL ICON (p. 40)
• Displayed when there is an unread message.
• Blinks until one of the call messages is read.
!2 DSC SWITCH ICON (p. 42)
• Displayed when the "CH Auto Switch" is set to "Ignore"
or "Manual"
• Blinks when the "DSC Switch" is OFF.
!3 BATTERY INDICATOR
Displays the battery's remaining power.
Indication
Battery level Full
blinks when the battery is overcharged (or over voltage)
!4 GPS ICON
• Stays ON while valid GPS position data is received.
• Blinks while no position data is received.
!5 CHANNEL GROUP ICON
• The selected Channel Group's icon is displayed.
• "WX" is displayed for the Weather channel in the USA,
Australian, and Export versions. (p. 12)
Charging Battery
Mid
required exhausted
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6