Icom IC-M93D EURO Instruction Manual page 46

8
DSC OPERATION
D Receiving a Test call
TIP: By default, the Auto ACK function automatically
sends an Acknowledgement to the calling station (p. 42).
If the function is set to "Manual," the following screens are
displayed.
When a Test call is received:
• The alarm sounds for 2 minutes.
• "RCVD Test Call" is displayed.
1. Push any software key to turn OFF the alarm.
2. Push the software key below your next operation.
[IGN]
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• " " blinks continuously until you display the call message.
39
[ABLE]
• Sends the Acknowledgement "Able to Comply."
• The call is saved in the DSC Log.
[ACPT]
• Accepts the call.
• Displays the received call's information.
• The call is saved in the DSC Log.
• Push the software key below [ACK] to send a Test
Acknowledgement call. (p. 32)
• Push the software key below [RESEND] to resend.
NOTE: If the Auto ACK function is set to "Auto," the Test
Acknowledgement call is automatically sent to the calling
station when the call is received. (p. 42)