Icom IC-M93D EURO Instruction Manual page 34

8
DSC OPERATION
D Sending an Individual Acknowledgement (Continued)
4. Select "Able to Comply," "Unable
to Comply," or "Propose New CH."
• Able to Comply:
• Unable to Comply: Sends an Acknowledgement call
• Propose New CH: Able to communicate but proposes
5. Push the software key below [CALL] to send the
Acknowledgement call.
• "Transmitting Individual ACK" is displayed, and then the
assigned channel is automatically selected.
6. Push [PTT] to communicate.
27
Sends an Acknowledgement call
without any changes.
but cannot communicate.
another channel.
Specify the channel by pushing [▲]
or [▼]. (Example: Channel 77)
Sending on the "Compose Other" screen
You can also send an Individual Acknowledgement by
selecting "Individual ACK" on the "Compose Other" screen.
This enables you to resend an Acknowledgement,
or send even after sending an "Unable to Comply"
Acknowledgement.
1. Push the software key below
• The "Compose Other" screen is displayed.
2. Push [▲] or [▼] to select "Individual ACK," and then
push [ENT].
• The Individual caller's station or MMSI is displayed.
L "Individual ACK" is not displayed if no Individual call has
been received.
3. Select the station to send an Acknowledgement call to,
and the push [ENT].
4. Repeat steps 3 to 5 described on the left column.
.