Appendix (Restrictions During Multi-Encoding) - JVC VN-H557U Instructions Manual

Appendix (Restrictions during Multi-encoding)

Possible Encoder No.1 and No.2 Setting Combinations
During multi-encoding, there is a limit to the total number of pixels per unit time that can be encoded
0
simultaneously by three encoders (total frame size and frame rate processed by each encoder).
Encoder No.2 cannot be set to a frame size with a resolution higher than that of Encoder No.1.
0
If you have selected an invalid combination on the Encode page, a pop-up message indicating that the
0
limit on the total number of pixels per unit time has been exceeded when you press the [OK] button.
Refer to the table below for the settable No.2 combinations.
0
Framesize
1920 1080
1280 960
1280 720
720 480
640 480
640 360
352 240
320 240
Framesize
1920 1080
1280 960
1280 720
720 480
640 480
640 360
352 240
320 240
: Encoder No.2 settable, Encoder No.3 not settable
J
: Both Encoder No.2 and Encoder No.3 not settable
—
Appendix (Restrictions during Multi-encoding)
94
Framerate
30
30
25
15 - 10
7.5 - 5
3 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
Framerate
30
30
25
15 - 1
30
25 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
Encoder No.2 settings
1920 1080
25 15 - 10 7.5 - 5
Encoder No.2 settings
1280 960
25 15 - 10 7.5 - 1
3 - 1
1280 720
30 - 1