Appendix (Restrictions During Multi-Encoding) - JVC VN-H657U Instructions Manual

Appendix (Restrictions during Multi-encoding)

Possible Encoder No.1 and No.2 Setting Combinations
During multi-encoding, there is a limit to the total number of pixels per unit time that can be encoded
0
simultaneously by three encoders (total frame size and frame rate processed by each encoder).
Encoder No.2 cannot be set to a frame size with a resolution higher than that of Encoder No.1.
0
If you have selected an invalid combination on the Encode page, a pop-up message indicating that the
0
limit on the total number of pixels per unit time has been exceeded when you press the [OK] button.
Refer to the table below for the settable Encoder No.1 and No.2 combinations.
0
Framesize
1920 1080
1280 960
1280 720
720 480
640 480
640 360
352 240
320 240
.
Framesize
1920 1080
1280 960
1280 720
720 480
640 480
640 360
352 240
320 240
: Encoder No.2 settable, Encoder No.3 not settable
.
J
: Both Encoder No.2 and Encoder No.3 not settable
—
Appendix (Restrictions during Multi-encoding)
92
Framerate
30
30
25
15 - 10
7.5 - 5
3 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
Framerate
30
30
25
15 - 1
30
25 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
30 - 1
Encoder No.2 settings
1920 1080
25 15 - 10 7.5 - 5
Encoder No.2 settings
1280 960
25 15 - 10 7.5 - 1
3 - 1
1280 720
30 - 1