Table of Contents
Advertisement
Note :
Even when [Communicate] on the [Audio] page
0
is set to "Full Duplex", audio from the camera's
microphone may be interrupted momentarily
when the [Speech] button is pressed. This is not
a malfunction.
SD Card
Switches to the SD operation screen.
(A p.85 [[SD Card] Operation Screen] )
Memo :
When you are logged in as "user", the [SD
0
Card] button cannot be selected (grayed out),
and data on the SD card cannot be played back.
Protocol
Selects a protocol to be used when the viewer
acquires data from the camera.
HTTP(Unicast):
0
Allows monitoring the camera with a single
viewer. If a packet is lost, the packet data is
transmitted again and recovered.
RTP(Multicast):
0
Allows multiple viewers to monitor the camera.
[Set values: HTTP(Unicast), RTP(Multicast)]
Memo :
When playing back via multicast, start multicast
0
transmission on the [Multicast] page.
(A p.58 [[Multicast] Page] )
Note :
If you select "RTP(Multicast)" and start the
0
Built-in Viewer, you may be alarmed by the
Windows Firewall.
In this case, select "Do not block" and proceed
to the next step.
If you select "Block", the multicast stream will be
blocked by the Windows Firewall. The viewer
cannot play back multicast data.
Encoder
Select the encoder No. for streaming.
[Set values: RNo.1, No.2, No.3]
Memo :
When [Protocol] is set to "RTP(Multicast)", you
0
need to specify [Multicast IP Address] and
[Multicast Port] as well.
(A p.81 [[Multicast] Settings] )
Compression format and Framesize
Displays the compression format of the stream and
the resolution of the frame size.
Display Size
Sets a display size of image area.
Fixed:
0
Sets the image display size to the same as the
preset frame size. For frame size setting, see
[Encoding] page of [Advanced Settings].
(A p.35 [[Encoding] Page] )
Variable:
0
Displays images according to the Web
browser's window size.
[Set values: RFixed, Variable]
Memo :
The window size of the Web browser does not
0
change even if you select the "Fixed" or
"Variable" display size.
Details
Opens the Settings page. The display page varies
depending on the access authorization of the user.
admin: [Basic Setting1] Page
0
operator: [Basic Setting2] Page
0
user: [Miscellaneous] Page
0
(A p.26 [How to Open the Settings Page] )
REC Display
While recording to the SD card is in progress, a
REC icon appears at the top right corner of the
camera's video image.
Built-in Viewer Screen Configuration
73
Advertisement
Chapters
Table of Contents
