Setting Using Internet Explorer
Setting (continued)
Encoding Page
This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using admin or operator .
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry
will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using Built-in Viewer, reboot the viewer.
● There is a maximum limit to the bit rate for transmission by VN-V686WPU. If a bit rate that exceeds the
maximum limit is specified, this new setting will not be applied. For details on the maximum transmission
limit, refer to [Network Requirements] (A Page 24).
A
Frame Size
C
D
For setting the frame size of each JPEG or MPEG4 screen to VGA (640 x
480) or QVGA (320 x 240).
Select one of the four different patterns.
E
F
A
B
G