JVC VN-H557U Instructions Manual page 59

9 Framesize
Displays the [Framesize] settings specified for
each encoder.
(A p.36 [ Framesize ] )
9 Framerate
Displays the [Framerate] for multicast
transmission.
The frame rate can be changed when Encode is set
to "JPEG".
[Set values: R30 fps, 15 fps, 10 fps, 7.5 fps, 5 fps,
3 fps, 2 fps, 1 fps, 1/2 fps, 1/3 fps, 1/5 fps, 1/10 fps,
1/30 fps]
Memo :
You can specify a frame rate that does not
0
exceed the upper limit specified in the [Basic
Setting2] page or [Encoding] page.
(A p.35 [[Encoding] Page] )
Destination Address
For specifying the destination address of multicast
transmission.
Specify the multicast address. When other devices
that make use of multicast transmission exist,
ensure that each of them is set to a different
multicast address.
[(Factory default) Encoder No.1: 225.0.1.1,
Encoder No.2: 225.0.2.1, Encoder No.3:
225.0.4.1]
Destination Port
For specifying the destination port number for
multicast transmission.
Specify an even number for RTP compliance.
When other devices that make use of multicast
transmission exist, it is recommended that each of
them be set to a different port number.
Multiple multicast streams cannot be received on
a single computer when there are duplicate port
numbers.
[(Factory default) Encoder No.1: 49152,
Encoder No.2: 59152, Encoder No.3: 29152]
Start
Saves the [Framerate], [Destination Address], and
[Destination Port] settings, and starts manual
distribution.
It is displayed as a [Stop] button during distribution.
[Framerate], [Destination Address], and
[Destination Port] cannot be changed while
distribution is in progress.
EncoderNo.4
For setting manual distribution by EncoderNo.4.
Destination Address
For specifying the destination address for audio
distribution.
Specify the multicast address. When other devices
that make use of multicast transmission exist,
ensure that each of them is set to a different
multicast address.
[Factory default: 225.0.3.1]
Destination Port
For specifying the destination port number for
audio distribution.
Specify an even number for RTP compliance.
When other devices that make use of multicast
transmission exist, it is recommended that each of
them be set to a different port number.
Multiple multicast streams cannot be received on
a single computer when there are duplicate port
numbers.
[Factory default: 39152]
Start
Saves the [Destination Address] and [Destination
Port] settings, and starts manual distribution.
It is displayed as a [Stop] button during distribution.
[Destination Address] and [Destination Port]
cannot be changed while distribution is in progress.
[Advanced Settings] Page -[Multicast] Page
59