Table of Contents
Advertisement
B Select [Time Zone].
C Click to confirm.
Memo :
For information on the network settings, please
0
consult your network administrator.
If you enter the following URL directly into the
0
address bar of Internet Explorer, you can open
the [Basic Setting1] page after logging in as
"admin" in 2 of Step 3 without going through the
Built-in Viewer.
Example: http://192.168.0.2/cgi-bin/
display.cgi?basicmenu1.html
After the [Security Warning] screen appears,
0
click the [YES] button to proceed.
3 When the confirmation window opens,
click [OK].
The camera restarts using the new IP
0
address. The camera takes about 2 minute
to restart.
Memo :
Access from this computer may fail when the IP
0
address of the camera is changed. If you access
the camera from the same PC, set the IP
address of the PC accordingly.
If the display or configuration of the open
window appears strange
Check the PC settings as follows:
A Select [Start]-[Control Panel]-[Appearance
and Personalization].
B Open [Adjust screen resolution] under
[Display].
C Check that Resolution is set to Monitor size
(recommended) in use.
D Otherwise, change the [Monitor size
(recommended)] setting and press the [OK]
button.
E In [Display Settings], press the [Keep
changes] button.
Step4 IP Address Setting for the Camera
25
Advertisement
Chapters
Table of Contents
