JVC VN-H557U Instructions Manual page 40

1st Trigger
Select the 1st trigger to perform an action.
[Set values: RPin Input1 Make, Pin Input1 Break,
Pin Input2 Make, Pin Input2 Break, Position, Audio
Detection1, Audio Detection2, Motion Detection,
Tampering Detection, Time, Easy Day/Night]
Memo :
If you set the [2nd Trigger] to "Disable", an action
0
will be performed when only [1st Trigger] is
triggered.
[Max. Interval] and [2nd Trigger] can be selected
0
only when input terminal ("Pin Input1 Make", "Pin
Input1 Break", "Pin Input2 Make", or "Pin Input2
Break") is selected for the [1st Trigger] trigger.
Max. Interval
This is available when both [1st Trigger] and [2nd
Trigger] are set.
Specify the maximum interval between each
trigger for [1st Trigger] and [2nd Trigger].
An action will be performed if [2nd Trigger] occurs
within the maximum time interval after [1st
Trigger] occurs.
[Set values: 1 sec to 3600 sec]
2nd Trigger
Select the 2nd trigger to perform an action.
[Set values: RDisable, Pin Input1 Make, Pin Input1
Break, Pin Input2 Make, Pin Input2 Break]
Mail
Mail Settings:
0
If you have set the [SMTP Server], [Port
Number], and [Send Mail Address] on the [Alarm
Environment] page, the "Preset" message is
shown. If not set, the "Unset" message is shown.
(A p.42 [[Alarm Environment] Page] )
Mail Address:
0
Enter the recipient's mail address.
Mail Text:
0
Enter the mail text. Input not more than 127
characters.
[Advanced Settings] Page - [Alarm] Page
40
JPEG Attachment:
0
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
Encoder:
0
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
You cannot select [JPEG Attachment] if there is
0
no channel with Encode set to JPEG.
By using [JPEG Attachment], images recorded
0
immediately before and/or after the trigger are
attached. In the event that the action of a trigger
takes time, the image you want may not be
included in the attachment.
For example, even when "Easy Day/Night" is
selected as the trigger condition and set to
"Color", a black-and-white image may be
attached instead of a colored one.
TCP
TCP IP Address:
0
Enter the IP address or FQDN of the destination
of TCP notification.
TCP Port Number:
0
Enter the port number of the destination of TCP
notification. (1 to 65535)
TCP Data:
0
Enter a character string to be sent for TCP
notification. Input not more than 127 characters.
JPEG Attachment:
0
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
Encoder:
0
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
You cannot select [JPEG Attachment] if there is
0
no channel with Encode set to JPEG.
By using [JPEG Attachment], images recorded
0
immediately before and/or after the trigger are
attached. In the event that the action of a trigger
takes time, the image you want may not be
included in the attachment.
For example, even when "Easy Day/Night" is
selected as the trigger condition and set to
"Color", a black-and-white image may be
attached instead of a colored one.