JVC VN-H557U Instructions Manual page 6

Transportation
Do not throw away the original box of the unit.
0
Keep it and use it for transporting the unit in
future.
Carrying the Camera
Remove the connecting cables when
0
transporting the unit.
When transporting the unit, turn off the power of
0
the system.
Pack the unit with cushioning material so as to
0
avoid shock when transporting.
Handle the unit with care and do not subject it to
0
vibration or shock.
Copyright Protection
With the exception of the user being the
0
copyright holder or when permission such as for
duplication has been granted by the copyright
holder, permission is required in principle for the
duplication, modification, or transmission of
copyrighted video and audio data.
Unauthorized duplication, modification, or
transmission of copyrighted material may
constitute a copyright infringement, and the user
may be liable to compensate for any damages.
When using copyrighted video/audio data, be
sure to check the license agreement of the
copyrighted material thoroughly.
When rights or rights holders are involved with
regard to the targeted duplicating subject,
permission may be required for shooting or
using (processing) it. Be sure to check the
licensing conditions thoroughly.
Copyright
Please note that broadcasting materials
0
recorded with this camera for profit or for the
general public to watch may violate the author's
rights protected under copyright law.
Use of recorded materials without prior consent
0
from the author is forbidden under copyright law
except in limited, specific instances.
Precautions
6
Maintenance
Turn off the power before performing
0
maintenance.
Wipe using a soft cloth.
0
Wiping with thinner or benzene may melt or
tarnish its surface. For tough stains, wipe using
a cloth that is dipped into a neutral detergent
diluted with water, followed by wiping with a dry
cloth.
When the same position is monitored
0
continuously over a long period, the pan/tilt/
zoom/focus mechanisms will deteriorate more
quickly. To keep the quality of mechanical
performance of pan/tilt/zoom/focus, this product
is equipped with an auto cleaning function that
performs cleaning once a week.
(A p.64 [ Auto Cleaning ] )
Handling SD Cards
Do not place any object inside the camera.
0
Inserting an object other than a SD card into the
SD card slot may cause fire, electric shock, or
malfunction of the product.
Do not disassemble or modify the SD card.
0
Before you turn off the power of the camera or
0
remove the SD card from the card slot, make
sure to press the [Unmount] button on the [SD
Card Recording] page.
While writing to the SD card is in progress,
turning off the power or removing the card may
damage the data stored inside it.
(A p.46 [[SD Card Recording] Page] )
If there is a likelihood that data stored in the SD
0
card is damaged, remove the SD card from the
camera, and back up the necessary data. Next,
make use of the SD Formatter (version 4.0 or
later) distributed by the SD Association to format
the SD card, followed by inserting the card into
the camera.
The SD Formatter is available on the following
website.
https://www.sdcard.org/downloads/
There is a maximum limit to the number of times
0
data on the SD card can be rewritten. When
approaching to the limit, data recording and
playback may not function properly. In the event
that the recorded data is damaged or when a
playback error occurs, replace the SD card with
a new one.
Do not use or store the card at a place that is
0
subject to static electricity or electrical noise.
Make sure that the orientation is correct when
0
you insert the SD card. Inserting the card forcibly
in the wrong orientation may damage the
camera or the SD card.
(A p.12 [Inserting a SD Card] )