Built-In Viewer Operation - JVC VN-H557U Instructions Manual

Built-in Viewer Operation

The camera comes with a Built-in Viewer.
Enter the IP address of the camera in the address
bar of Internet Explorer to start up the Built-in
Viewer. The Built-in Viewer enables operations
such as saving of still images in the JPEG format
and pan/tilt/zoom (PTZ) operations.
You can operate the Pan, Tilt and Zoom
0
functions using a mouse.
Memo :
The first time you display the Built-in Viewer in
0
Internet Explorer, the Built-in Viewer will be
installed on the computer.
The settings required for running the Built-in
0
Viewer on the PC are stored in cookies.
Settings that are stored in cookies are
0
information related to the operation of the
Built-in Viewer, such as the number of the
encoder to be displayed and whether the display
size is set to a specified or variable size. Settings
related to camera operation are not stored in
cookies.
Note :
If you delete the cookies, the current viewer
0
settings are deleted. The next time when you
start the Built-in Viewer, the viewer will operate
in the initialized state.
List of operations
[Built-in Viewer Screen Configuration] p.72
0
[[Image Settings] Settings] p.74
0
[ [PTZ Settings] ] p.76
0
[ [PTZ Control] ] p.78
0
[[Unicast] Settings] p.80
0
[[Multicast] Settings] p.81
0
[[On Screen Display] Settings] p.82
0
[[Audio Monitor] Settings] p.83
0
[[Other] Settings] p.84
0
[[SD Card] Operation Screen] p.85
0
[Exiting Built-in Viewer] p.88
0
If the display or configuration of the open
window appears strange, check the
computer settings as follows:
A Select [Start]-[Control Panel]-[Appearance
and Personalization].
B Open [Adjust screen resolution] under
[Display].
C Check that [Resolution] is set to [Monitor size
(recommended)] in use.
D Otherwise, change the [Monitor size
(recommended)] setting and press the [OK]
button.
E In [Display Settings], press the [Keep
changes] button.
Built-in Viewer Operation
71