Additional Cautions; Cautions For Setting The Detection Function; Cautions For Changing The Encoding Setting; Troubleshooting - JVC VN-H37U SERIES Instructions Manual

Additional Cautions

Cautions for setting the detection function

You cannot set motion detection, audio detection, and tampering detection at the same time.
An error message is displayed when one detection function setting is already enabled and you try to select
another. Check the content of the error message, set the already-enabled detection function to "OFF", and
then reconfigure the detection function. (
"Audio Detection Page", "Tampering Detection Pages")

Cautions for changing the encoding setting

When changing an already-configured encoding setting on the Basic Settings 2 page, Encoding page, or SD
recording page, PTZ and the auto patrol settings are cancelled.
In this case, set PTZ and the auto patrol settings again after setting the encoding setting. ( "Instructions
(Setting)" ─ "Operations" ─ "PTZ Page", "Auto Patrol Page")

Troubleshooting

Check the following items if you cannot record to an SD card.
Disengage the lock on the SD card.
Use an SD card that is compatible with this camera. (
Follow the instructions in [SD Card Record Page] (
Format the SD card via the camera. (
You may become unable to update the screen if you frequently move between the SD card playback screen
and the advanced settings screen.
Press the [Cancel] button, or press the refresh button of your Internet browser.
Check the following items if the frame rate of images which are recorded to an SD card is lower than the set
value or variable.
When the Sense Up functions activate, (
"Advanced Settings" ─ "Camera Page") the sensitivity is increased by decreasing the frame rate of
images recorded to the SD card. As a result, the number of playback frames may be lower or vary.
© 2012 JVC KENWOOD Corporation
"Instructions (Setting)" ─ "Operations" ─ "Motion Detection Page",
Page 4)
Page 8) to enable SD card recording settings.
Page 10)
"Instructions (Setting)" ─ "Internet Explorer Setting" ─
20
LST1392-001A