Table of Contents
Advertisement
Auto Pan
Specifies the auto pan settings. This item sets the
Auto Pan operation which moves at a specific
speed from the preset [Start].
Click [Auto Pan] in the operation menu to open
0
the setting screen.
When you click the [Apply] button, the settings
0
selected for [Mode] and [Speed] become valid
on the viewer, and they are stored in the
computer.
Mode
Return:
0
Move between [Start] and [Return] from [Start]
toward [Return].
You can set a start and return position manually.
Memo :
During auto pan, the [Start] settings are used for
0
zoom and focus.
Speed
Select the auto pan operation speed.
[Set values: Low, RMiddle, High]
Start, Return
For setting [Start] and [Return] of the operation. Pan,
tilt, or zoom the camera manually, decide on a
position, and click [Set] to register.
[Set]:
0
Complete the Auto Pan settings.
[GoTo]:
0
Move to the registered position.
Memo :
For details on manual pan, tilt, and zoom
0
operations, refer to the following.
(A p.79 [ Pan / Tilt / Zoom ] )
If the tilt position of [Start] is different from that of
0
[Return], the path of movement when moving
from [Start] to [Return] may vary from the path
when moving in the opposite direction.
[Control] - [PTZ Settings]
77
Advertisement
Chapters
Table of Contents
