Encoding Page - JVC VN-V686U Instructions Manual

Setting Using Internet Explorer
Setting (continued)

Encoding Page

This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using admin or operator .
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry
will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
● When settings on this page are altered during playback using Built-in Viewer, reboot the viewer.
● There is a maximum limit to the bit rate for transmission by VN-V686U. If a bit rate that exceeds the
maximum limit is specified, this new setting will not be applied. For details on the maximum transmission
limit, refer to [Network Requirements] (A Page 24).
A
Frame Size
C D
For setting the frame size of each JPEG or MPEG4 screen to VGA (640 x 480)
or QVGA (320 x 240).
Select one of the four different patterns.
E F
A
B
G