JVC VN-H557U Instructions Manual page 75

9 [OnePushAWC] button
Executes AWC (automatic white balance control).
Memo :
To execute [OnePushAWC], fill the screen
0
completely with a white object in a location with
lighting conditions similar to those of the subject
you are going to shoot.
Depending on the subject and lighting condition,
0
you may not achieve the desired white balance
even if you have performed [OnePushAWC]
once. In this case, perform [OnePushAWC]
again.
Even when white balance is set to "ATW-Wide",
0
"ATW-Narrow" or "ATW-Full", pressing the
[OnePushAWC] button switches the mode
automatically to AWC.
Iris
The iris is adjusted automatically when "Auto +1",
"Auto", or "Auto -1" is specified.
9 Mode
Auto -1:
0
Converges to a level darker than "Auto".
Auto:
0
This setting is used under general
circumstances.
Auto +1:
0
Converges to a level brighter than "Auto".
Manual:
0
Click the [+] or [-] button once to change to the
next value. To change the value continuously,
click repeatedly. The value will not change if the
button remains pressed down.
[Set values: Auto -1, RAuto, Auto +1, Manual]
9 ND Filter
When shooting at a bright location, such as
outdoors, you can insert an ND filter to help prevent
small-aperture blur from occurring.
AUTO:
0
Automatically detects the brightness and
switches to use an ND filter.
Selectable when Iris is set to "Auto+1" / "Auto" /
"Auto-1".
ON:
0
Always uses an ND filter.
Selectable when Iris is set to "Manual".
OFF:
0
ND filter is not used.
[Set values: AUTO, ON, ROFF]
Back Light Compensation
Set this feature when there is a bright light source
in the same direction as the object. Enables
unwanted light sources to be excluded from the
photometry area.
9 Mode
OFF:
0
Disables backlight compensation.
Area 1 to 4:
0
Select a photometry area from the four areas.
[Set values: ROFF, Area 1, Area 2, Area 3, Area 4]
Photometry area
OFF Area 1 Area 2
Memo :
The backlight compensation area is not linked
0
to the electronic zoom.
Easy Day/Night
Sets video to Black & White mode. Also allows you
to select from among 3 levels for automatically
activating Black & White mode in low-light
conditions.
9 Mode
Color:
0
Keeps color mode activated at all times.
Black & White:
0
Keeps Black & White mode activated at all
times.
Auto Low:
0
Switches to Black & White mode when the
subject's signal level has a low level of
brightness.
Auto Mid:
0
Switches to Black & White mode when the
subject's signal level has a medium level
brightness.
Auto High:
0
Switches to Black & White mode when the
subject's signal level has a high level of
brightness.
[Set values: RColor, Black & White, Auto Low, Auto
Mid, Auto High]
[Control] -[Image Settings] Settings
Area 3 Area 4
75