Name Of Parts - JVC VN-H557U Instructions Manual

Name of Parts

VN-H557U
Camera
Name of Parts
10
A Cable cover
Remove the cable cover during installation or
connection.
To mount the camera with the cables pulled out
from the side, remove the center window cover.
When attaching the cable cover, pull out the
center window cover and pass the cables
through it.
B Adapter
Fix the camera on the ceiling mount bracket.
C Inside SD card cover
SD Card Slot
0
To insert a SD card into this slot for recording
and storage.
(A p.12 [Inserting a SD Card] )
[INITIALIZE] button:
0
Pressing the button for 5 seconds resets all
settings of the unit to the factory default, and
restarts the camera. (The camera takes
about 2 minutes to initialize or restart.)
The operation is the same as that when [All
Settings] on the [Maintenance] page is
executed.
(A p.63 [ All Settings ] )
[RESET] button:
0
Restarts the camera. (The camera takes
about 2 minute to restart.)
The operation is the same as that when
[Restart] on the [Maintenance] page is
executed.
(A p.63 [ Restart ] )
D Lens section
E Power terminal, red LED
Connect it to a DC 12 V or AC 24 V power
supply. When connecting to a DC 12 V power
supply, make sure to align the + and – polarities
correctly.
The red LED is lit when the power is on.
The black "NOT USE" terminal is not usable.
(A p.18 [Connect the power cable.] )
F Safety wire hook
To prevent the camera from falling off
accidentally, attach K fall prevention wire of the
unit to this hook.