Demo Mode (For Dealer Use) - Standard Horizon CP300i Owner's Manual

page. See next section for details of setting up the switching times. If the user agrees
to proceed, the image from the video input and the GPS Chart Plotter page will be
shown intermittently. The intermittence time is selected by Switching Timeout item.
b. SWITCHING TIMEOUT, the possible choices are 5,10,30 sec, 1, 5, 10 min. Allows
selecting the timing to change from Video Input and GPS Chart Plotter display.
c. RESTORE DEFAULTS, allows restoring the factory defaults for the Input picture
adjustment. When Restore default is executed, the message "OK" is shown next to
the selected menu item.
If the video signal is not present on the video connector, the corresponding item in the menu will
be shown with a light color (to identify that the option is not available).
II. Quick Activation by pressing [CLR] for 1 second
Pressing and holding [CLR] for 1 second from the Chart page display or from any main page
(Navigation, Highway, Celestial, GPS Status, DSC, NMEA DISPLAY); the following Soft
Keys are shown: [F
the Video Input connector, the Soft Keys will be shown in light color in order to identify that
they are not active.
III. Quick Activation by Soft Keys
It is possible to assign the Video Input mode to any of the Soft Keys. Press one of the Soft
Keys, the Soft Keys functions are shown. Pressing and holding for 1 second one of the Soft
Keys, the Soft Keys customization list will be shown. By selecting VIDEO option it will be
possible to assign the Soft Key to execute the Video Input function. Once the Soft Key has
been assigned to Video Input, its label will show the message [V
the Soft Keys will be assigned this way: [F
on, the functioning is identical to case II.
When the PIP video window is shown, the ShuttlePoint knob can be used to move the position of
the PIP window or move the cursor around the chart page. By default the PIP window is controlled
by the ShuttlePoint knob. To change so the chart cursor can be moved, press any Soft Key, then
press [V P ]. To change back to control the PIP window press any Soft Key, then press [V
ID AGE
again.
When the PIP window is shown, the cursor and the vessels position may be shown under the PIP
window.
2.13

DEMO MODE (FOR DEALER USE)

In Demonstration Mode the GPS Chart Plotter automatically places a Destination point on
the Chart page and simulates navigation to the point. Also, the active page displayed on the
screen changes every 10 seconds. The pages are shown in the following order: Start-Up
page, GPS Status page, Chart/Compass tape page, Chart/Fish Finder page, Fish Finder
Full page, Radar page, Navigation page, Highway Page, Celestial page, NMEA Display
page.
This mode is used by dealers to promote the features of the GPS Chart Plotter when on a retail shelf.
The Demo Mode can be selected from the Simulation Menu following the procedure:
Page 26
S ], [P P V
ULL CREEN I
NOTE (*)
], [A S ]. If no video signal is detected on
IEW UTO WITCH
S ], [P P V
ULL CREEN I
NOTE
NOTE
NOTE
]. If [V ] is pressed,
IDEO IDEO
], [A S ]. From now
IEW UTO WITCH
ID
GPS Chart Plotters
P ]
AGE