For CP300/CP300i
12.0.0 F
Soft Key on Dual Chart page
OCUS
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the GPS Chart Plotter has the focus
on, meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The
focus may be changed to the other chart window with the procedure below:
1. Press any Soft Key. The Soft Key labels appear on the bottom of the screen. A [F
Soft Key will be shown.
2. Press [Focus]. A popup window appears where the active focus window label is
highlighted.
3. Move the ShuttlePoint knob up and down to highlight the desired item and press [ENT].
The red border is moved to the focused window.
It is possible to change the focus by pressing and holding [FIND] for 2 seconds (in place of 1 and
2 steps in the above procedure).
For CP180/CP180i
12.0.1 Change Focus on Dual Chart page
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the GPS Chart Plotter has the focus
on, meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The
focus may be changed to the other chart window with the following procedure:
GPS Chart Plotters
Figure 12.0.0 - Example of Dual Chart page with [F
Figure 12.0.0a - Example of Dual Chart page with focus window shown
OCUS
NOTE
] shown
]
OCUS
Page 81