Obstructions - Standard Horizon CP300i Owner's Manual

2. Move the ShuttlePoint knob to highlight WRECKS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Wrecks.
4. Move the ShuttlePoint knob to highlight the desired Wreck and press [ENT].
5. Another window will be shown detailing the Wreck information.
6. Press [CLR] to show the actual position of the Wreck on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel's position.
4.0.4

Obstructions

This feature is used to locate the 20 nearest Obstructions to the position of your vessel.
An Obstruction is represented with an icon on the chart, see the following table:
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight OBSTRUCTIONS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Obstructions.
4. Move the ShuttlePoint knob to highlight the desired Obstruction and press [ENT].
5. Another window will be shown detailing the Obstruction information.
6. Press [CLR] to show the actual position of the Obstruction on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel's position.
Page 44
Figure 4.0.3a - Find Wrecks
Figure 4.0.4 - Obstruction icons Table
Figure 4.0.4a - Find Obstructions
GPS Chart Plotters