Standard Horizon CP300i Owner's Manual page 130

We, Yaesu UK Ltd. certify and declare under our sole responsibility that the following equipment
complies with the essential requirements of the Directive 1999/5/EC, with the provisions of
Annex III (Conformity Assessment procedure referred to in article 10)
Type of Equipment:
Brand Name:
Model Number
Manufacturer
Address of Manufacturer:
Applicable Standards:
This equipment is tested to and conforms to the essential requirements of directive, as included
in following standards:
Test
Conducted Emissions
Radiated Emissions
Radiated interference
Electrostatic Discharge ESD
Conducted RF interference
Conducted RF immunity
Compass Safe Distance
EFT – Bursts Fast Transients
DC Power Interruptions,
Variation and Polarity
inversions
Safety: Part 1
General Requirements
The technical documentation as required by the Conformity Assessment procedures is kept at
the following address:
Company:
Address:
Technical Construction File: Issued by Yaesu Musen Co., Ltd., Tokyo, Japan
GPS Chart Plotters
Declaration of Conformity
Nr. YUK-DOC-1209-11
7" Chart Plotter for Marine Navigation with internal GPS RX.
Standard Horizon
CP-300i
TWS S.r.l
Via Zaccagna 6, 54033 Carrara Italy
Standard
IEC EN 60945:2003/11
IEC EN 60945:2003/11
IEC EN 60945:2003/11
ISO/R 694
IEC EN 60945:2003/11
IEC EN 60945:2003/11
IEC EN 60950-1:2006/A1:2010
Yaesu UK Ltd
Unit 12, Sun Valley Business Park,
Winnall Close, Winchester SO23 0LB
File No: UK001209
Drawn up in:
Date:
Name and position:
Yaesu UK Ltd
Unit 12, Sun Valley Business Park
Winnall Close
Winchester SO23 OLB
United Kingdom
Tel: +44 (0)1962 866667
Fax: +44 (0)1962 856801
Email: sales@yaesu.co.uk
Winchester, United Kingdom
th
26 January 2012
PCJ Bigwood,
Technical Sales Manager
Page 131