Auto Detection - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
Select Auto Detection to automatically detect the IPv6 connection method used by your
Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6
connection type.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Address Settings
LAN IPv6 Address: Displays the router's LAN IPv6 Address link-local address.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-890L User Manual

Auto Detection

Home Settings
DIR-890L HW:A1 FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Settings >> Internet >> IPv6
My Internet Connection is: Auto Detection
IPv6 DNS SETTINGS
DNS Type: Obtain a DNS server address automatically
IPv6 DNS SETTINGS
DNS Type: Use the following DNS address
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 ADDRESS SETTINGS
LAN IPv6 Address:
LAN IPv6 Link-Local Address: fe80::6e72:20ff:fe3e:3846
Features Management
Save
IPv4
⌵
⌵
⌵
Advanced Settings ...
47