Ipv6 - Auto Detection - D-Link DIR-1950 User Manual

Section 3 - Configuration
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you can
manually select another IPv6 connection type. Click Save at any time to save
the changes you have made on this page.
DNS Type Select either Obtain DNS server address automatically or
Use the following DNS address.
Primary DNS Server If you selected Use the following DNS address, enter the
primary DNS server address.
Secondary DNS Server If you selected Use the following DNS address, enter the
secondary DNS server address.
Enable DHCP-PD
Enable or disable DHCP Prefix Delegation.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address
Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local
Displays the router's LAN link-local address.
Address
D-Link DIR-1950 User Manual

IPv6 - Auto Detection

IPv6 DNS Settings
LAN IPv6 Address Settings
39