Static Ipv6 - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).
Use Link-Local Enable or disable link-local address use.
Address:
Default Gateway:
Enter the default gateway for your IPv6 connection.
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
If Use Link-Local Address is disabled these additional parameters are available for
configuration:
IPv6 Address: Enter the address supplied by your ISP.
Subnet Prefix Enter the subnet prefix length supplied by your ISP.
Length:
LAN IPv6 Address Settings
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
D-Link DIR-890L User Manual

Static IPv6

Home Settings
DIR-890L HW:A1 FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Settings >> Internet >> IPv6
My Internet Connection is: Static IPv6
Use Link-Local Address: Enabled
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
Disabled
Use Link-Local Address:
IPv6 Address:
Subnet Prefix Length:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 ADDRESS SETTINGS
LAN IPv6 Address:
LAN IPv6 Link-Local Address: Not Available
Features Management
IPv4 Save
⌵
/64
Advanced Settings ...
49