Connecting A Wireless Client To Your Router; Wps Button - D-Link AC3200 Ultra User Manual

Section 7 - Connecting a Wireless Client to your Router

Connecting a Wireless Client to your Router

WPS Button

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as
wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that
you can press to connect to the DIR-890L router. Please refer to your user manual for the wireless device you want to connect to make sure you
understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-890L for about 1 second. The LED on the front will start to blink.
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
D-Link DIR-890L User Manual 192