Connected Clients - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Access Point Mode
Click on the Connected Clients icon to view details about the DIR-890L and its wireless
settings.
On this page you can see all the clients currently connected to the DIR-890L, and their IP
addresses.
To edit each client's settings, click the pencil icon on the client you want to edit.
Name: Enter a custom name for this client.
Vendor: Displays the vendor of the device.
MAC Address: Displays the MAC address of the device.
IP Address:
Displays the current IP address of this client.
Reserve IP:
Enable to reserve this IP address for this client.
IP Address
Specify an IP address for the DIR-890L's DHCP server to assign each
(Reserved): time the device is detected.
Parental Control: Allow or block access to the router.
Click Save when you are done.
D-Link DIR-890L User Manual

Connected Clients

Home
DIR-890L HW:A1 FW:1.10
Internet Connected
Click on any item in the diagram for more information.
Internet DIR-890L
Connected Clients
Click on the "Pencil" icon to manage devices access or change device name.
You can block a device from accessing your network completely.
Your PC
Unknown Vendor 192.168.0.165
2001:021:23::187:10:0000:0000
COPYRIGHT © 2016 D-Link
Edit Rule
Name: Your PC
Vendor: Unknown Vendor
MAC Address: ff:ff:ff:ff:ff:ff
IP Address: 192.168.0.165
Reserve IP: Enabled
IP Address (Reserved):
Parental Control: Enabled
Schedule:
Always Off
Save
Settings Management
Connected Clients: 1
USB Device
⌵
98