D-Link AC3200 Ultra User Manual page 66

Section 4 - Configuration - Router Mode
If your ISP uses the 6rd protocol for IPv6 connectivity, configure it using these options.
Assign IPv6 Prefix: Currently unsupported.
Primary DNS Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
6rd Manual Configuration
Enable Hub and
Enable if you want to minimize the number of routes to the destination
Spoke Mode: by using a hub and spoke method of networking.
6rd Configuration: Choose the 6rd DHCPv4 Option to automatically discover and
populate the data values, or Manual Configuration to enter the
settings yourself.
If you selected Manual configuration, configure the following options:
6rd IPv6 Prefix: Enter the 6rd IPv6 prefix and mask length supplied by your ISP.
WAN IPv4 Address Displays the router's IPv4 address.
6rd Border Relay Enter the 6rd border relay IPv4 address settings supplied by your ISP.
IPv4 Address:
LAN IPv6 Address Settings
LAN IPv6 Address: Displays the router's LAN IPv6 Address link-local address.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
D-Link DIR-890L User Manual
6rd
DIR-890L HW:A1
Settings >> Internet >> IPv6
6RD MANUAL CONFIGURATION
6RD MANUAL CONFIGURATION
LAN IPv6 ADDRESS SETTINGS
Home Settings
FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
My Internet Connection is: 6rd
Assign IPv6 Prefix:
Primary DNS Server:
Secondary DNS Server:
Enable Hub and Spoke Mode: Enabled
6rd Configuration: 6rd DHCPv4 Option
Enable Hub and Spoke Mode: Enabled
6rd Configuration: Manual Configuration
6rd IPv6 Prefix:
WAN IPv4 Address:
6rd Border Relay IPv4 Address:
LAN IPv6 Address: Not Available
LAN IPv6 Link-Local Address: Not Available
Features Management
IPv4 Save
⌵
⌵
⌵
/ 32
/
Advanced Settings ...
61