Wireless - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
From this page you can configure your wireless network settings.
Smart Connect
Smart Connect: When Smart Connect is enabled, the router automatically assigns
devices to the ideal wireless network to improve performance.
Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters.
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Advanced Settings
Security Mode: Choose None, WEP, or WPA/WPA2-Personal (recommended).
Transmission Select the desired wireless transmission power.
Power:
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 88 for more
information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
WPS-PBC Status: Enable or disable WPS-PBC fuctionality.
WPS-PIN Status: Enable or disable WPS-PIN functionality.
Refer to the next page if you wish to disable Smart Connect or click
Save when you are done.
D-Link DIR-890L User Manual

Wireless

Home Settings
DIR-890L HW:A1 FW:1.10
Wireless
Use this section to configure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
Settings >> Wireless
Smart Connect
Smart Connect: Enabled
Wi-Fi Name (SSID): Your_Wi-Fi_Network
Password: A_Str0nG_P@ssW0rd!%!
Security Mode: WPA/WPA2-Personal
Transmission Power: High
Schedule: Always Enable
Wi-Fi Protected Setup
Enabled
WPS-PBC Status:
WPS-PIN Status: Locked
Features Management
Guest Zone Save
Advanced Settings ...
⌵
⌵
⌵
64