Ipv4/Ipv6 Rules - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
The IPv4/IPv6 Rules page contains advanced options that let you set rules to restrict IP traffic
across your network or from your network to the Internet. To configure IPv4 rules, click IPv4
Rules from the Firewall Settings page. To configure IPv6 rules, click IPv6 Rules from the
Firewall Settings page. To return to the main Firewall Settings page, click Advanced.
Use the drop-down menu to select whether you want to ALLOW or DENY the rules you
create. You can also choose to turn filtering OFF.
If you wish to remove a rule, click on the corresponding trash can icon in the Delete column.
If you wish to edit a rule, click on the corresponding pencil icon in the Edit column. If you
wish to create a new rule, click the Add Rules button. Click Save when you are done. If you
edit or create a rule, the following options will appear:
Create New Rule
Name: Enter a name for the rule.
Source IP Address Enter the source IP address range that the rule will apply to, and using
Range: the drop-down menu, specify whether it is a WAN or LAN IP address.
Destination IP Enter the destination IP address range that the rule will apply to, and
Address Range: using the drop-down menu, specify whether it is a WAN or LAN IP
address.
Port Range: Select the protocol of the traffic to allow or deny (Any, TCP, or UDP)
and then enter the range of ports that the rule will apply to.
Schedule:
Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 88 for more
information.
Click Save when you are done.
D-Link DIR-890L User Manual

IPv4/IPv6 Rules

Home Settings
DIR-890L HW:A1 FW:1.10
Firewall Settings
Your router's high-performance firewall feature continuously monitors Internet traffic, protecting your network
and connected devices from malicious Internet attacks.
Features >> Firewall Settings >> IPv4
Turn IPv4 Filtering OFF
Turn IPv4 Filtering OFF
Turn IPv4 Filtering ON and ALLOW rules listed
Turn IPv4 Filtering ON and DENY rules listed
Name Schedule
Add Rule
Remaining: 24
COPYRIGHT © 2016 D-Link
Create New Rule
Name:
Source IP address Range: WAN
Destination IP Address Range: WAN
Port Range: TCP
Schedule: Always Enable
Apply
Features Management
Advanced IPv6 Rules Save
Edit Delete
⌵
⌵
⌵
⌵
78