Ipv6 - Auto Detection - D-Link COVR-1900 User Manual

Section 3 - Configuration
Select Auto Detection to automatically detect the IPv6 connection method
used by your Internet Service Provider (ISP). If Auto Detection fails, you can
manually select another IPv6 connection type. Click Save at any time to save
the changes you have made on this page.
Select either Obtain DNS server address automatically or
DNS Type
Use the following DNS address.
If you selected Use the following DNS address, enter the
Primary DNS Server
primary DNS server address.
If you selected Use the following DNS address, enter the
Secondary DNS Server
secondary DNS server address.
LAN IPv6 Address Settings
Enable or disable DHCP Prefix Delegation.
Enable DHCP-PD
Displays the router's LAN link-local address.
LAN IPv6 Link-Local
Address
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
Enter a valid LAN IPv6 address.
LAN IPv6 Address
Displays the router's LAN link-local address.
LAN IPv6 Link-Local
Address
D-Link COVR-1900 User Manual

IPv6 - Auto Detection

IPv6 DNS Settings
40