Home - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Access Point Mode
The Home page displays the current status of the DIR-890L in the form of an interactive
diagram. You can click each icon to display information about each part of the network at
the bottom of the screen. The menu bar at the top of the page will allow you to quickly
navigate to other pages.
The Home page displays the status of the access point's Internet connection.
Note: As of firmware 1.10, if your screen displays "Internet Disconnected", clicking the
"Click to repair" option is not recommended since the Setup Wizard will reconfigure the
device to operate in Router Mode. Instead, confirm your Ethernet cable connection to an
Internet connected uplink router and then navigate to the Settings > Internet menu item
to manually configure your device.
D-Link DIR-890L User Manual

Home

DIR-890L HW:A1
DIR-890L HW:A1
Home
FW:1.10
Internet Connected
Click on any item in the diagram for more information.
Internet DIR-890L
Home
FW:1.10
Internet Disconnected
Click on any item in the diagram for more information.
Internet DIR-890L
Click to repair
Settings Management
Connected Clients: 1
USB Device
Settings Management
Connected Clients: 1
USB Device
96