D-Link AC3200 Ultra User Manual page 58

Section 4 - Configuration - Router Mode
Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password
in order to connect to the Internet.
Choose Share with IPv4 to reuse your IPv4 PPPoE username and
PPPoE Session:
password, or Create a new session.
If you selected Share with IPv4 configure the following options:
Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
IP Address: Enter the IP address provided by your ISP. (Static IP only)
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected Create a new session, configure the following options:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
IP Address: Enter the IP address provided by your ISP. (Static IP only)
Service Name: Enter the ISP service name (optional).
Select either Always On or Manual.
Reconnect Mode:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
D-Link DIR-890L User Manual
PPPoE
DIR-890L HW:A1
Settings >> Internet >> IPv6
Home Settings
FW:1.10
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
My Internet Connection is: PPPoE
PPPoE Session: Share with IPv4
Address Mode: Dynamic IP
MTU: 1492 bytes
PPPoE Session: Share with IPv4
Address Mode: Static IP
IP Address:
MTU: 1492 bytes
PPPoE Session: Create a new session
Username:
Password:
Address Mode: Dynamic IP
Service Name:
Reconnect Mode: Always On
MTU: 1492 bytes
PPPoE Session: Create a new session
Username:
Password:
Address Mode: Static IP
IP Address:
Service Name:
Reconnect Mode: Always On
MTU: 1492 bytes
Features Management
IPv4 Save
⌵
⌵
⌵
⌵
⌵
⌵
⌵
⌵
⌵
⌵
⌵
53