Connected Clients - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
Click on the Connected Clients icon to view details about the router and its wireless settings.
On this page you can see all the clients currently connected to the router, and their IP
addresses.
To edit each client's settings, click the pencil icon on the client you want to edit.
You may also add rules for currently disconnected or powered off devices.
Name: Enter a custom name for this client.
Vendor: Displays the vendor of the device.
MAC Address: Displays the MAC address of the device.
IP Address: Displays the current IP address of this client.
Reserve IP: Enable to reserve this IP address for this client.
IP Address Specify an IP address for the DIR-890L's DHCP server to assign each
(Reserved):
time the device is detected.
Parental Control:
Allow or block access to the router.
Click Save when you are done.
D-Link DIR-890L User Manual

Connected Clients

Home Settings
DIR-890L HW:A1 FW:1.10
Internet Connected
Click on any item in the diagram for more information.
Internet DIR-890L
Connected Clients
Click on the "Pencil" icon to manage devices access or change device name.
You can block a device from accessing your network completely.
Your PC
Unknown Vendor 192.168.0.165
2001:021:23::187:10:0000:0000
COPYRIGHT © 2016 D-Link
Edit Rule
Name: Your PC
Vendor: Unknown Vendor
MAC Address: ff:ff:ff:ff:ff:ff
IP Address: 192.168.0.165
Reserve IP: Enabled
IP Address (Reserved):
Parental Control: Enabled
Schedule: Always Off
Save
Features Management
Connected Clients: 1
USB Device
Host / Guest
⌵
32