D-Link AC3200 Ultra User Manual page 48

Section 4 - Configuration - Router Mode
DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be
available for configuration:
Device Mode: Router Mode
My Internet DS-Lite
Connection Is:
Advanced Settings
DS-Lite Select DS-Lite DHCPv6 Option to let the router allocate the AFTR
Configuration: IPv6 address automatically. Select Manual Configuration to enter
the AFTR IPv6 address manually.
DS-Lite DHCPv6
B4 IPv6 Address: Enter the B4 IPv4 address value used here.
WAN IPv6 Once connected, the WAN IPv6 address will be displayed here.
Address:
IPv6 WAN Default Once connected, the IPv6 WAN default gateway address will be
Gateway: displayed here.
Manual
AFTR IPv6 Enter the AFTR IPv6 address used here.
Address:
B4 IPv6 Address:
Enter the B4 IPv4 address value used here.
WAN IPv6
Once connected, the WAN IPv6 address is displayed here.
Address:
D-Link DIR-890L User Manual
DS-Lite
DIR-890L HW:A1
Settings >> Internet
Home Settings
FW:1.10
Internet
Use this section to configure your Internet Connection type. There are several connection types to choose
from Static IP, DHCP, PPPoE, PPTP, L2TP and DS-Lite. If you are unsure of your connection method, please
contact your Internet service provider. Note: If using the PPPoE option, you will need to remove or disable
any PPPoE client software on your computers.
⌵
Device Mode: Router Mode
⌵
My Internet Connection is: DS-Lite
COPYRIGHT © 2016 D-Link
⌵
DS-Lite Configuration: DS-Lite DHCPv6 Option
B4 IPv4 Address: 192.0.0.
WAN IPv6 Address: N/A
IPv6 WAN Default Gateway: N/A
COPYRIGHT © 2016 D-Link
⌵
DS-Lite Configuration: Manual Configuration
AFTR IPv6 Address:
B4 IPv4 Address: 192.0.0.
WAN IPv6 Address: N/A
IPv6 WAN Default Gateway: N/A
COPYRIGHT © 2016 D-Link
Features Management
IPv6 Save
Advanced Settings ...
43