Virtual Server - D-Link AC3200 Ultra User Manual

Section 4 - Configuration - Router Mode
In some cases you may have two applications running on different devices which require
the same public port. Virtual server allows you to remap a different external port to each
device. To configure the virtual server, from the Port Forwarding page click Virtual Server.
To return to the main Port Forwarding page, click Port Forwarding.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the Add Rules button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New User
Name:
Enter a name for the rule. Alternatively, select the protocol/Application
from the drop-down menu.
Local IP: Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both,
or Other).
Protocol Number: If you entered Other above, enter the protocol number.
External Port:
Enter the public port you want to open.
Internal Port: Enter the private port you want to open.
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 88 for more
information.
Click Save when you are done.
D-Link DIR-890L User Manual

Virtual Server

Home Settings
DIR-890L HW:A1 FW:1.10
Virtual Server
Your router helps share a single IP address assigned by your Internet service provider among several clients
in your home. Virtual servers are preset port mappings for popular services, like a web or e-mail server, that
route traffic to a specified client inside.
Features >> Virtual Server
Status Name Local IP Protocol External Port
Add Rule Remaining: 24
COPYRIGHT © 2016 D-Link
Create New Rule
Name:
Local IP:
⌵
Protocol: TCP
External Port:
Internal Port:
⌵
Schedule: Always Enable
Apply
Features Management
Port Forwarding Save
Internal Port Edit Delete
⌵
<< Application Name
⌵
<< Computer Name
80