Router Mode - D-Link AC3200 Ultra User Manual

Section 2 - Choosing an Operation Mode
In Router Mode, the DIR-890L AC3200 Ultra Wi-Fi Router operates as the central device of your network. This is the most common type of installation
and is the factory default setting suitable for most users. The DIR-890L connects to your cable modem, DSL modem, or other Internet source and
shares your Internet connection with your wired and wireless devices.
Internet
(e.g. DSL/Cable Modem)
Use this mode for:
• Setting up a network for the first time.
• Replacing an existing router or network equipment.
• Adding a router to share a broadband connection which was previously connected to a single computer.
Place your DIR-890L near your broadband Internet connection device (e.g. DSL/Cable modem) and connect to it via Ethernet cable.
To use your DIR-890L as a Router, refer to Installation - Router on page 12.
D-Link DIR-890L User Manual

Router Mode

Create a Home Network (Router Mode)
Broadband
Connection Device
DIR-890L Wired and Wireless Devices
9